1 / 4
Ergonomic DIN 61 DIN 51 Lid Jerry Can Opener Tool / Spanner — zdjęcie 1
1 / 4

Ergonomic DIN 61 DIN 51 Lid Jerry Can Opener Tool / Spanner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tool that assists in opening/closing DIN 61 and DIN 51 lids, commonly found on HDPE plastic jerry cans.

Ocena
5 / 5
Polubienia
19
Pobrania
127
Wydruki
1
Wyświetlenia
485
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This tool is the result of an in-depth research project, centred on designing a tool to assist users opening and closing plastic jerry cans. It incorporates the current best practices of ergonomic handle design, to benefit those with limited dexterity/arthritis, as well as the wider population. The tool is designed to be easily 3D printable on a wide range of printers, without support material.

Recommended Print Settings:

  • ≥ 3 perimeters

  • ≥ 4 top and bottom layers

  • 0.16 - 0.24mm layer height

  • 5% gyroid infill (produces a perfectly strong print as most of the strength comes from the perimeters, but feel free to increase this if you like)

  • Fuzzy skin - greatly increases grip, shown in 3rd pic (I used a box modifier to limit this to the handle section)

  • PETG, PLA or ABS

PETG is likely the most appropriate filament, as although its tensile strength is slightly lower than PLA's, it is more flexible under load and therefore less likely to fail catastrophically. This often leads to a part that can withstand more force before breaking. PETG also has good water resistance, mild chemical resistance and moderate UV resistance.

Using these settings, my PLA / PETG prints used 80g filament

FEA and qualitative real-word testing showed the tool was able to achieve at least 25 Nm, but please conduct testing on your own print.

Please do let me know if you have any suggestions for improvement :)

Tagi