1 / 1
Schumacher Mi5evo Shorty Lipo Battery Strap System
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
System for securing a 2S Shorty Lipo in a Schumacher Mi5evo RC car
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
System for securing a 2S Shorty Lipo in a Schumacher Mi5evo RC car.
Needs 4x M3 heat threaded inserts, one each for the forward and rear retainers and one each for the forward and rear posts. You need to use fairly short M3 bolts to secure the posts.
I've made this for a Lipo which is 24.5mm in height.
Printed in 1.75mm PLA at 10% infill but perhaps PETG would be stronger for this use case.