Wyniki wyszukiwania: mi5

Sortowanie

126 modeli

P
PrintablesEDnation

BTT HDMI5 V1.2 display mount Voron

**This design is for HDMI5 V1.2** If you're looking for HDMI5 V1.1 mount, use this one: https://www.printables.com/model/787236-btt-hdmi5-v11-display-mount-voron Notes Mount BTT HDMI5 Version 1.2 on Voron V2.4 and Trident My display came…

Pobrania
12 318
Polubienia
231
Ocena
4,97
P
PrintablesSteveC

Bigtreetech HDMI5 Screen mount for Voron 2.4

I made this screen holder for my Voron 2.4 350, I printed another screen holder on here, but it really wasn't the quality that i was looking for with my Voron. It looked cool but I couldn't bring myself to use it due to screw alignment's…

Pobrania
1914
Polubienia
135
Ocena
4,88
P
PrintablesEDnation

BTT HDMI5 V1.1 display mount Voron

This design is for HDMI5 V1.1 If you are looking for HDMI5 V1.2 mount, use this one: https://www.printables.com/model/926845-btt-hdmi5-v12-display-mount-voron Design intents There are existing mount for the HDMI5 but I ended up…

Pobrania
666
Polubienia
73
Ocena
5
P
PrintablesDaedy

HDMI5 case for Voron 2.4 300

The case is integrated in place of the central part of the skirt, without modifying the existing skirts on each side. I made an opening for access to the screen settings buttons, and I put it underneath so that it is not visible. The…

Pobrania
618
Polubienia
120
Ocena
5
P

Voron 2.4 Front Left Skirt for 415066-bigtreetech-hdmi5-screen-mount-for-voron-24

This is left skirt which goes with https://www.printables.com/model/608317-btt-hdmi5-screen-mount-for-voron-24. Print Mirror for right side. Use skirt as per printer size.

Pobrania
569
Polubienia
83
Ocena
5
P

BTT HDMI5 Screen Mount For Voron 2.4

This is Mount for Voron 2.4 to fix BTT HDMI5 as fixed screen This design works for 250Cube, 300Cube and 350Cube models of Voron 2.4 Goes with skirts at…

Pobrania
540
Polubienia
87
Ocena
5
P
PrintablesZdyrax

BTT HDMI5 v1.1 screen case

This is a BigTreeTech HDMI5 1.1 case. Screen screws in the “ back ” part and the case “ front ” part snaps to the “ back ”. 3 different angle brackets (25°, 45° or 90°) which slide in to the " back " part. Each of these brackets have…

Pobrania
475
Polubienia
38
Ocena
4,4
P
PrintablesMatt

AMD Radeon Instinct MI50 Triple Slim 80mm Fan Shroud

GENERAL INFO The MI50 is a 16GB or 32GB server accelerator card without built in fans. It has a single mini-displayport and can be (relatively) easily flashed to Radeon Pro VII firmware and used in a desktop PC for light gaming or local…

Pobrania
451
Polubienia
23
Ocena
0
P
PrintablesBit Matter

AMD Instinct MI50 shroud

This is a fan shroud which replaces the original one of the AMD Instinct MI50 (32GB). It uses a blower fan which is able to cool the card at a pwm value of 65%. I'm using three cards like this on one mainboard and their temperatures are…

Pobrania
424
Polubienia
25
Ocena
5
P
Printables3Dwork.io

BIQU HDMI5 Case

I needed a cover for my BIQU HDMI5 touch display I found this from Armourist and used/adapted it to another 7" display that works really well with a nice and functional design. Feet are reversible and you can use them with 15 and 30 deg,…

Pobrania
410
Polubienia
51
Ocena
4,67
P
Printableskaifas

voron btt hdmi5 v1.2 screen mount

they added a speaker/moved connectors which interfered with mount

Pobrania
404
Polubienia
36
Ocena
5
P
PrintablesSamA

AMD MI50, MI100, M210 GPU 80mm Fan Cooling Attachment

80mm fan adapter for most AMD MIXXX series GPUs. There is an optional fan bracket that can used if desired, or the fan can be mounted directly to the plenum. The bracket is designed to be used with m3 heat set inserts for mounting the…

Pobrania
398
Polubienia
17
Ocena
5
P
Printableskarandash8

Radeon Instinct MI50 80mm fan case

Print in ABS with 4 perimeters to make it a solid object.

Pobrania
374
Polubienia
13
Ocena
0
P
PrintablesMeaulnes

BTT HDMI5 Case

I didn't have any luck finding a case or a mount for my BTT HDMI5 1.1, so I made this one. Here are the print settings for the one in the photos: SunLu PETG 0.2mm layers 75% infill No supports (mostly) For the bracket, I printed it on…

Pobrania
309
Polubienia
22
Ocena
4,67
P
PrintablesWhatAMess13

BigTreeTech HDMI5 Mount for Elegoo Neptune 3 Pro/Plus/Max

It's a mount for BTT HDMI5 screen. It is designed to be mounted on Elegoo Neptune 3 Pro/Plus/Max It is designed to use M3 threaded inserts in the bracket with M3 screw to connect the screen case to the mount. UPDATE: You can now choose to…

Pobrania
297
Polubienia
70
Ocena
4,5
P
PrintablesHermannSW

Shroud for AMD Instinct MI50 workstation GPU and BA10033B12H BBQ blower fan

Instinct MI50 BBQ blower fan shroud JSCAD share link There is a new sticky “Radeon Instinct MI50” thread on mersenneforum.org (registering needed for access): https://www.mersenneforum.org/node/1072920 Used Radeon [pro] vii GPU prices are…

Pobrania
263
Polubienia
14
Ocena
5
P
PrintablesJens Friedrich

BTT HDMI5 V1.2 case for Elegoo Neptune (3/4) and others

Case for BigTreeTech HDMI5 display V1.2 with outlets to the back. Different mounting options. The backplate has different mounting options for landscape or portrait in different positions. Just chose the screw holes for your needs. You…

Pobrania
252
Polubienia
31
Ocena
5
P
PrintablesM.Kayed

BigTreeTech HDMI5 Screen Mount Ender 3/ Pro/ V2/ S

Screen mount for the BTT HDMI5 screen. Fits most Creality type bed slingers. The larger top part will need some supports for the inner part. To install - Place the screen into the back section first (screenbottom.stl). The back piece…

Pobrania
237
Polubienia
39
Ocena
5
P
Printablesvervurax

BTT HDMI5 1.2 bracket for E3NG Flat Mesh Skirt

Mounting bracket compatible with flat mesh skirt for Ender 3 NG . Dedicated for BigTreeTech HDMI 5 v1.2 display. Requires 4x M3 heat set inserts to connect with the skirt and 4x M3x8 screws to secure the display. USB and HDMI cables…

Pobrania
235
Polubienia
42
Ocena
5
P
PrintablesJumarras

BTT HDMI5 Mount Conector Hide

Use support under voron logo.

Pobrania
212
Polubienia
24
Ocena
5
P
PrintablesMatt

AMD Radeon Mi50 shroud for BFB0712HF blower fan

Printed with the top (the part with the hole for the fan) on the build plate and tree supports set to only touching build plate. In testing on superposition 1080p high this kept the card about 10c cooler than the triple fan model and…

Pobrania
211
Polubienia
14
Ocena
0
P
Printablesjinetix

BTT HDMI5 V1.2 Clicky Clack Mount

Did not like the opening above the bracket which showed the cables running behind the screen from above. One of the main perks of having the 1.2 version of the HDMI5 screen is the ability to hide the cables better, and this aids with…

Pobrania
194
Polubienia
16
Ocena
5
P
PrintablesAnuragD

BTT / BigtreeTech HDMI5 v1.2 Display mount for Ender 3 / S1/ S1 Pro

None of the offerings on printables so far, prints without significant support or needs an extremely tuned machine. Great designs that are relatively easy and reliable to print, don't come in version that supports v1.2 screens or are not…

Pobrania
189
Polubienia
21
Ocena
4,67
P
PrintablesBrynD

Ender 7 BTT HDMI5 Touchscreen Surround, Manta E3EZ CB1

When upgrading the main controller board to a Bigtreetech Manta e3eZ (or other Manta board) with a CB1 computer a new touchscreen is also required, as the stock Ender 7 screen is not compatible. This screen surround is for the BTT HDMI5…

Pobrania
187
Polubienia
14
Ocena
5
P
PrintablesfreakyDude

BTT HDMI5 Touch Screen v1.2 Mount for Voron

This minimalist mount allows you to securely attach the BigTreeTech HDMI5 Touch Screen to the front of your Voron 2.4 printer at a 45° viewing angle. Designed for simplicity and functionality, it integrates seamlessly with the printer’s…

Pobrania
173
Polubienia
19
Ocena
4,5
P
PrintablesAnuragD

Sovol SV08 BTT HDMI5 v1.2 Tilt Display Mount

None of the offerings on printables so far, prints without significant support or needs an extremely tuned machine. Great designs that are relatively easy and reliable to print, don't come in version that supports v1.2 screens or are not…

Pobrania
163
Polubienia
27
Ocena
5
P
PrintablesTheNexusAvenger

BIGTREETECH HDMI5 Display Voron Mount (V1.2 Version)

Edit: This was found to be incompatible with the original model's mount. There is a working design for the Prusawire , but no Voron mount exists yet. This remix is intended to be a drop-in replacement for the “BTT HDMI5 Display Case…

Pobrania
163
Polubienia
22
Ocena
5
P
PrintablesQuattrox

V-Minion BTT HDMI5 Case and Holder

a modified bracket to mount the Big Tree Tech PiTFT50 on the front of the V-Minion you need 2x M6 T-Nut 2x M6x12 allen screw 1x M6x16 allen screw (M6x12 also work) 4x M3x10 countersunk screw the holder is modified so that the TFT does not…

Pobrania
160
Polubienia
30
Ocena
4,5
P
PrintablesBigCat

Voron 0.2 BTT HDMI5" screen mount

did a small remix to put a btt hdmi 5 screen on my voron 0.2. You will have to take off the two small outter skirts from the front for this to fit but it fits perfectly using the bottom extrusion. let me know if you would want me to…

Pobrania
153
Polubienia
29
Ocena
0
P
PrintablesAgwood

Stealth Skirts for Ender 3 NG Beta - BTT HDMI5 Screen

A tested modification of the beautiful Trident stealth Skirts for the Ender 3 NG which is an amazing mod for the old school Ender 3. I modified the screenbox and right side front wing to be able to use the BTT HDMI5 screen. Because the…

Pobrania
144
Polubienia
52
Ocena
0

VORON TRIDENT STEALTH SKIRTS 2 BTT HDMI5 1.1 Mod

Available in 3 build sizes: 250 mm, 300 mm, and 350 mm. Note: These parts require that you purchase HDMI and USB Ribbon Cables, so as to maintain as much of the Stealth aesthetic as possible with the Front Right Skirt. Even so, a small…

Pobrania
140
Polubienia
23
Ocena
5
P
PrintablesKm0107_39

BTT HDMI5 V1-2 mount bracket for SIBOOR Trident and Clicky-Clack Fridge Door

Compatible with SIBOOR's Voron Trident kit and Clicky-Clack Fridge Door.

Pobrania
139
Polubienia
22
Ocena
0
P
PrintablesFHOGPHIL

HDMI5 screen case and mount

Case and mount for BTT HDMI5 screen for a 4040 extrusion end cap. There are two fronts - with or without a sign. Two signs - “Ender3 belt“ and blank. Two mounts - swivel and fixed. Both tilt. I used 90 deg connections but straight one…

Pobrania
139
Polubienia
16
Ocena
5
P
PrintablesHauseMeister

HDMI5 Switchwire Mount

Remixed to fit switchwire frame without panels Someone would need to rework it for the panels to latch properly

Pobrania
120
Polubienia
32
Ocena
0

AMD V340 V520 V620 MI25 MI50 MI60 MI100 MI210 Fan Shroud

I wrote a guide on how to make it more usable here: https://github.com/Szalacinski/amdv620-to-w6800-flashing-guide If you are in China, you can buy the complete kit from GS Origin here: https://item.taobao.com/item.htm?id=1052125661134…

Pobrania
119
Polubienia
9
Ocena
5
P
PrintablesDystrackshun

HDMI5 V1.1 Case front

Model needed updating to accommodate the slightly larger size of the V1.1 HDMI5. 3.

Pobrania
119
Polubienia
14
Ocena
5
P
PrintablesHao Wang

BTT HDMI5 V1.2 Display Voron V2.4 Mount

I was looking for a mount for the BTT HDMI5 when I found @EDnation 's model. I left the bracket the same, but did a few adjustments to the frame. Mainly fixed some tolerance issues, and added some space for the ribbon cable, as I was a…

Pobrania
113
Polubienia
12
Ocena
0
P
PrintablesGrumpyRobot

BTT HDMI5 v1.2 case and mounting adapter

Case for the BTT HDMI5 v1.2 touchscreen that can be used with KlipperScreen. Includes a separate mounting adapter compatible with the stock LCD mounting arm for a Creality Ender3 V2. Description There are several existing models for the…

Pobrania
112
Polubienia
11
Ocena
0

BTT HDMI5 Screen Mount For Voron 2.4 extended for Clicky Clack Fridge door!

This moves the 5" screen 20mm forward to make room for the 20mm extrusion. You need to also print the updated decorative circular parts I have included them.. You will need some support for the side skirts (there is a left and right to…

Pobrania
111
Polubienia
30
Ocena
0
P
PrintablesJoushou

BTT HDMI5 V1.2 Stealth Skirt Mount

A search for Stealth Skirt HDMI5 mounts didn't turn up any results that worked with the speaker and jack placement of the v1.2 board. Brightness adjustment buttons on the board can be accessed through access holes with a paperclip or…

Pobrania
107
Polubienia
10
Ocena
0
P
PrintablesEKO Studio 3D

Bigtreetech HDMI5" Soporte para Voron 2.4

Soporte Frontal para pantalla Bigtreetech HDMI5 , ideal para Voron 2.4, dando un aspecto más limpio al ocultar los cables de la pantalla.

Pobrania
105
Polubienia
22
Ocena
5
P
PrintablesSixpack99

BigTreeTech HDMI5 Side Mount for Ender 3 S1

Remixed an Elegoo model I found here on Printables to support the Ender 3 S1, but also to add 4 point mounting holes (which was missing from the original model) and a different style of display mounting bracket. I had to completely…

Pobrania
104
Polubienia
18
Ocena
5
P
PrintablesTHiNK rc

BTT HDMI5 Case

Wanted a decent case for the HDMI5 touch screen, and as I couldn't find something to fit my needs, made my own. Screen is fully encapsulated, and has brackets to mount to any slot extrusion frame, like the Bear2.1 I'm using mine on. Also…

Pobrania
101
Polubienia
16
Ocena
0
P
Printablesxpolr

BTT HDMI5 1.2 Slim Case

Fuse the M3x4mm fusion bushings. Insert {btthdmi-reset-buttons.stl} into {btthdmi-back.stl} (invert beforehand to avoid dropping) Fuse the {btthdmi-back.stl} to the HDMI5 v1.2 board using M3x8-10 SHCS Insert {btthdmi-action-buttons.stl}…

Pobrania
100
Polubienia
17
Ocena
5
P
PrintablesU.Design

VT300 STEALTHSKIRTS for Clicky clack door+BTTHDMI5 1.1

This mod is for Trident 300 size with BTT HDMI5 1.1 lcd and Clicky-Clack door mod Note: As in the original mod …These parts require that you purchase HDMI and USB Ribbon Cables! Big thanks to @PrintStructor for the original Stealthskirts!…

Pobrania
99
Polubienia
30
Ocena
0
P
PrintablesMr Tondy

SV08 BTT HDMI5 v1.2 Case

With the original model, I had many issues, like the three buttons not reaching the ones mounted on the screen and the frame not fitting into the case because the two locking tabs wouldn't pass between the screen and the side walls I…

Pobrania
95
Polubienia
7
Ocena
4,5
P
PrintablesMRSalguod

BTT HDMI5 Mount for the Clicky-Clack Fridge Door with the stealthchanger Door Buffer V2

A modified version of @DETMan's BTT HDMI5 Mount for Clicky Clack Door for use with the stealthchanger Door Buffer. Print with normal voron settings.

Pobrania
94
Polubienia
20
Ocena
0
P
Printablesjinetix

BTT HDMI5 1.2 Screen Mount for Switchwire / Enderwire

BigTreeTech HDMI5 1.2 mount for the Switchwire or Enderwire.

Pobrania
94
Polubienia
11
Ocena
0
P
PrintablesMajor Hack

BTT HDMI5 v1.0/v1.2 mount for Voron with Clicky Clacky and/or Door Buffer or StealthChanger

The BTT HDMI5 V1.2 display moved the HDMI and usb cables to be perpendicular to the PCB, so older versions of this mount won't work. These files should work with the Clicky Clacky door mod, and/or the Door Buffer for Stealthchanger. There…

Pobrania
93
Polubienia
13
Ocena
0
P
PrintablesKasper Walczuk

Magnetic BTT HDMI5 v1.2 Screen Mount for Ender 3, Prusa and more

The mount uses 14 6x1.8mm magnets that are glued in place The mount uses the same T slot nuts and screws that the Ender 3 screen uses, and the screen is secured to its case using the screws that came with the HDMI5 The case was designed…

Pobrania
92
Polubienia
14
Ocena
5
P
PrintablesSeabass

BTT HDMI5 enclosure for MK3 Bear frame 2.1

BTT HDMI5 enclosure for MK3 Bear frame 2.1 Note that I use these anti-vibration feet, the elevate the printer a little bit and provide extra clearance: https://www.amazon.com/dp/B08FRBL2ZC?psc=1&ref=ppx_yo2ov_dt_b_product_details

Pobrania
91
Polubienia
4
Ocena
5
P
PrintablesHauseMeister

Hdmi5 Switchwire mount

It's a tight fit careful of your ribbon cables.

Pobrania
88
Polubienia
24
Ocena
2
P
PrintablesMythos3Design

BTT HDMI5 Drop-in Shell Case - 3030 profile

The only assembly required is fastening the display into the case, using 4 pcs of M3 hex socket screws, length 6 mm. These will screw into the back, using the standoffs on the display. Design by M3D . Works just like the case designed for…

Pobrania
86
Polubienia
15
Ocena
5
P
PrintablesPrintSomething

BTT HDMI5 V1.2 Mount for my Voron 2.4 Canopy

So you wanted a place to put your 5in screen up higher or your Voron 2.4. Now you can if you have my Voron 2.4 Canopy. Will need a BTT HDMI5 V1.2 with the cables coming out the back. You will also have to remove the speaker on the back by…

Pobrania
83
Polubienia
21
Ocena
0

BIQU HDMI5 V1.2 Case

UPDATE 05Nov2024: Hopefully the changes I made to v1.2.1 address the issues in the comments. Case for the BIQU/ BTT HDMI5 V1.2 touchscreen. BTT released V1.2 of the HDMI5, which moved the outlets to the rear of the screen and added a…

Pobrania
81
Polubienia
11
Ocena
5
P
PrintablesCiax

BTT HDMI5 case for Enderwire

The whole thing is very wobbly. “HDMI5 base” requires support. BOM: 6x16 M3 2x M3 heatinsert Cable adapters I used: USB C: https://de.aliexpress.com/item/1005004456693859.html HDMI: https://de.aliexpress.com/item/1005005750965229.html…

Pobrania
79
Polubienia
26
Ocena
0
P
PrintablesEKO Studio 3D

BIGTREETECH HDMI5 SWITCHWIRE

Printed with VoronDesing parameters. Walls: 4 Filling: Gyroid 40% Material: ABS Tools used 6xScrew M3x16mm 2xheatinsert M3

Pobrania
78
Polubienia
4
Ocena
3
P
PrintablesZ3ALT

HDMI5 Skirt for Voron with Clicky-Clack Fridge Door

Moved the display to the front when Clicky-Clack Door is installed. Otherwise parts of the display are invisible below the new 2020 profiles of the door. Add an extra 1mm to ensure the door can move freely.

Pobrania
77
Polubienia
14
Ocena
5
P
Printablesmaxkf

BTT Biqu HDMI5 Touch Screen mounting housing sideways simple

I redesigned this part to fit the HDMI5 V1.1 from BTT. The housing is screwed onto the printer first, then the screen is screwed into the mounting. You need: 6x M3x8mm screws two M3 nuts that slide into your aluminium profile feel free to…

Pobrania
72
Polubienia
10
Ocena
5
P
Printableszjsk

Mercury 1.1 BTT HDMI5 Mount

With this model you can use three heat inserts on the stand piece to connect it with the modified center skirt for the Mercury 1.1. The stand and skirt center connect to the 2020 extrusions using the normal roll in or hammer head type nut…

Pobrania
68
Polubienia
14
Ocena
0
P
PrintablesHjort Creations

BigTreeTech HDMI5 mount for 3030 extrusion

I designed a very simple mount for the 5 inch touchscreen from BigTreeTech for my new RatRig. I did not want any bells and whistles on it that would complicate the mounting.

Pobrania
65
Polubienia
7
Ocena
0
P
PrintablesRhize

BTT HDMI5 Mount for Troodon 2.0

Original model was very complete with multiple mount options all in 1 step file. I've removed some of the options to streamline down to 3 needed components - the mount and a 2 part screen frame. The USB-C port hole has been moved to…

Pobrania
61
Polubienia
6
Ocena
0
P
Printablesane109

BTT HDMI5 Mount for Voron V0

This is a mount and bezel for the BTT HDMI5 display that avoids the use of overhangs and bridges wherever possible. Due to it's length, this is only compatible with the Bigger Skirts mod, or mods that involve taller feet. Hardware needed:…

Pobrania
60
Polubienia
12
Ocena
0
P
PrintablesViviana Jenkins

BigTreeTech HDMI5 V1.2 Case for the Sovol SV08 - Stock Mount + Open Enclosure Compatible

I have seen quite a few mounts for the HDMI5 from BigTreeTech designed for the Sovol SV08, however, most of the ones I have tried would prevent me from opening or closing the doors for my official Open Enclosure , or hung well below the…

Pobrania
57
Polubienia
14
Ocena
0
P
PrintablesBlindBadger

BigTreeTech HDMI5 Mount for Micron R1 Skirts

This mount I modeled after the R1 Skirts for other displays, but made a mount to fit the HDMI5 based on specs and feedback. Much thanks to mattd on the doom discord for testing this while my screen was stuck in shipping!

Pobrania
56
Polubienia
12
Ocena
5
P
PrintablesJustin Burke

BTT HDMI5 V1.2 Stealth Skirt Mount for Clicky-Clack door

Remix of “ BTT HDMI5 V1.2 Stealth Skirt Mount” to add 20mm of depth to work with the clicky-clack door system.

Pobrania
55
Polubienia
7
Ocena
5
P
PrintablesMadRat_rus

Sovol SV08 BTT HDMI5 v1.2 Display Mount

Sovol SV08 BTT HDMI5 v1.2 Display Mount installation in standard grooves

Pobrania
55
Polubienia
4
Ocena
0
P
PrintablesViviana Jenkins

BigTreeTech HDMI5 V1.2 - Expanded and Reworked Model

I noticed that the official STEP file for the BigTreeTech HDMI5 V1.2 had some inaccuracies, and was just the board, making it difficult to model based off of it. I did my best to finish the rest of the model and fix the inaccuracies I was…

Pobrania
54
Polubienia
7
Ocena
0
P
PrintablesTeam Clockworks

BTT HDMI5 V1.2 display mount Voron (Clicky-Clack, more space for USB)

This printable file contains only the modified bracket that allows for more space around the USB connector. For the rest of the parts (screen frame), consult the original model.

Pobrania
53
Polubienia
12
Ocena
0
P
PrintablesPhillip Rivas

BTT HDMI5 1.2 Mount for Troodon 2.0 Pro

Mounts to the front of the printer where the original magnetic bracket goes. The screen that came with my printer suddenly died one day (likely due to the strong magnets placed directly behind it) and Formbot sent me the updated model as…

Pobrania
51
Polubienia
4
Ocena
0
P
PrintablesPhil

BTT HDMI5 Mount Troodon 2.0

Quickly edited the mount to fit the Troodon 2.0. Chopped off the top part the goes into the extrusion and added a bar in the middle to handle the 2xM3 screws that go into the frame. Use screen housing from Voron 2.4 mount. It's a bit…

Pobrania
50
Polubienia
3
Ocena
0
P
PrintablesArnoldstrife

Bigtreetech HDMI5 Screen mount for Voron 2.4 with Snap in Cable Cover.

The basic cover is from Stephen C. But the other case has notches where the cables come out and allows for a snap in cable cover. I added 3 different sizes 7mm, 10mm, 20mm. The measurement is from the other case to the end of the cable…

Pobrania
50
Polubienia
9
Ocena
0
P
PrintablesBalgerion

QIDI X Smart/Plus/Max BTT HDMI5 klipperscrn mod

QIDI X Smart/Plus/Max BTT HDMI5 klipperscrn mod Frame stl and step file.

Pobrania
49
Polubienia
13
Ocena
5
P
Printablesandrew furst

VORON 2.4/Trident Fridge Door/BTT HDMI5 Sex Skirts 300

Got tired of waiting for a good looking skirt to use on my VORON 2.4 that worked with both the BTT HDMI5 and the Fridge Door mod. I loved the look of the Stealth Skirts by PrintStructor but as that design wasn't the most compatible with…

Pobrania
48
Polubienia
15
Ocena
0
P
PrintablesWyatt

HDMI5 V1.5 Case

V2 improves the operation of compliant buttons and allows more room for the screen. V1 compliant button work poorly or not at all. I am working on a mount for the case so you can put it on either side of the printer. The threads of v1 are…

Pobrania
47
Polubienia
7
Ocena
5
P

Protective cover for Xiaomi Mi5 Mi 5 Pro

Protective cover for Xiaomi Mi 5 , no supports needed. I used a TPU 98A flexible filament from Filamentum.

Pobrania
47
Polubienia
2
Ocena
0
P
Printablesthekojent

HDMI5 Display Bracket

A bracket to mount the BigTreeTech HDMI5 display to the left side of a Ratrig V-Core 4. The main bracket can be mirrored to mount the display on the right side instead. BOM In addition to the two printed parts, you will need: BigTreeTech…

Pobrania
38
Polubienia
3
Ocena
0
P
PrintablesDavid McFarland

BTT HDMI5 v1.1 Screen Mount for Tenlog TL-D3 or 151mm hole mount

An external mount for BTT HDMI5 v1.1 screen for a Tenlog TL-D3 printer/ a surface with two screw holes 151mm apart, 35 degrees canted from the surface. You can use the original screws for the Tenlog TL-D3 to mount this. This sits over the…

Pobrania
38
Polubienia
4
Ocena
0
P
PrintablesJoe Loyd

Top-Hat-RightCorner-BTT-HDMI5

Re-orient it to sit on the flat back side as the creator intended before slicing it.

Pobrania
37
Polubienia
12
Ocena
5
P
PrintablesAa_Ron

BIGTREETECH HDMI5 Case and Mount SOVOL

This is a case and mount for the BIGTREETECH HDMI5 touchscreen. Features: perfect Fit for HDMI5 touchscreen fully functional buttons access to all ports slim design press fit face plate for a professional look, blank or with text(will…

Pobrania
36
Polubienia
6
Ocena
0
P
PrintablesK B

BTT HDMI5 Display for Bastion

Have you wanted Klipperscreen on your Bastion? Well wait no further. Add to your collection of tiny rubber ducks and get a BTT HDMI5. Then print this mod out and have at it. Print settings are the usual – 4 walls, 30% infill, supports if…

Pobrania
36
Polubienia
8
Ocena
5
P
PrintablesDutchAblaze

BTT HDMI5 Enclosure

Couldn’t find an enclosure that fit my use case for the 5” screen so i made my own. Maybe i didn’t look hard enough bit it was a fun evening project. Hope this fits your needs. Materials: any could work, my use case is mobile, so TPU was…

Pobrania
34
Polubienia
1
Ocena
0
P
PrintablesLance Thompson

btt hdmi 5 hdmi5 for switchwire/enderwire

a mount for the hdmi 5 by btt for the switchwire/enderwire

Pobrania
33
Polubienia
2
Ocena
0
P
PrintablesVince Formosa

Troodon 2.0 HDMI5 Screen Mount

Screen Mount for the Troodon 2.0 for a Biqu/BigTreeTech HDMI 5 Touchscreen. 20deg Tilt

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesHypoxic01

Voron 0.2 HDMI5 mount with Power Switch

Mount for BTT HDMI5 on Voron 0.2

Pobrania
32
Polubienia
2
Ocena
0

BTT HDMI5 V1.2 display mount Voron with cable protectors

Printed using standard the standard Voron 2.4r2 parts profile.

Pobrania
28
Polubienia
4
Ocena
0
P
PrintablesJulian Schrader

Anycubic Predator Faceplate for BigTreeTech HDMI5 Skreen

Disclaimer: The files arent printed yet, so i dont know if i made mistakes, if you have noiced something let me know.

Pobrania
28
Polubienia
5
Ocena
0

HDMI5 V1.2 case

BTT HDMI5 v1.2 case Very much inspired by this lol https://www.printables.com/model/1056296-btt-hdmi-5-case/files HARDWARE LIST: M3x6 x4 M3x8 x4

Pobrania
27
Polubienia
7
Ocena
4
P
Printablesjoek1973

Schumacher Mi5 / Mi5 Evo Bumper

Bumper for use in 1:10 Touring Car model Mi5 or Mi5evo made by Schumacher RC Racing. To be printed in 1.75mm TPU (95A), no top or bottom layers, 4 vertical shells, 12% honeycomb infill, and 200% infill extrusion width in PrusaSlicer.

Pobrania
27
Polubienia
2
Ocena
0
P
Printableswilhems

BTT HDMI5 V1.2 display mount for V0.2 - with Skirts

Remix of kaifas 's V2.4 remix to support the V1.2 version of the display. Multibody skirts included to fit either side of the display on the Voron V0.2.

Pobrania
26
Polubienia
5
Ocena
0
P
PrintablesBobsinger

BTT HDMI5 v1.2 case for Sovol SV08

The BTT HDMI5 display connectors differ from v1.1. I've created a mount that can be used to mount it either on the top or in place of the LCD display. This remix is mostly a collection of excellent models from JensFriedric_1095981 and…

Pobrania
26
Polubienia
3
Ocena
0
P
Printablestill

Voron Zero 0.2 BTT HDMI5 Case

I wanted a case for a BTT HDMI5 fo the Voron Zero, that wasn't problematic in transport. So i made this version that mounts the display vertically to the side, and folds up against the side of the printer for transport. The whole thing is…

Pobrania
25
Polubienia
4
Ocena
5
P
PrintablesBen Ford

BTT HDMI5 1.2 Voron 0.2 Mount

Mount and feet spacers to allow for BTT HDMI5 1.2 mount on a Voron 0.2 using EDNations screen case.

Pobrania
23
Polubienia
3
Ocena
0
P
PrintablesShihchiun

Mounting Arm for BigTreeTech HDMI5 and Prusa Mini

In addition to the screws needed for the original model, requires 2 M3x8 screws and 3030 t-nuts to attach to the Prusa Mini. You will have to supply a right-angle HDMI adapter or cable to get everything to fit. The USB-C cable bundled…

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesTheNexusAvenger

Voron 0.2 S1 BIGTREETECH HDMI5 V1.2 Removable Mount

(Intended to be paired with this display mount .) This screen mount for the Voron V0.2 S1 (slightly taller skirts) adds a mount for the BIGTREETECH HDMI5 V1.2, and is held in with magnets for easy removal during transport. This requires…

Pobrania
19
Polubienia
4
Ocena
0
P

Siboor HDMI5 Display Bracket

It only needed a little force to break the standard HDMI5 bracket at the thinnest part (see picture). This design adds a few ribs to strengthen that part of the design, and adds a couple of holes for tool access. Print with the back down.…

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesTWB

Rolohaun Delta Flyer Refit BTT HDMI5 1.2 Top Mount

I modified the original mount created by NoobEnginer on Thingiverse to fit the 1.2 version of the BTT HDMI5 screen, as well as changed the base to shorten it and remove the arm and swivel feature. I also modfied Kanrog's modular top by…

Pobrania
16
Polubienia
6
Ocena
0
P
PrintablesMakerMindNexus

10 inch 2u mount for BTT HDMI5

I wanted to add a BTT HDMI5 display to my LabRax 10inch rack and so I remixed the two files to come up with this. Hope it helps others looking for a similar option.

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesBigDan1190

BTT HDMI5 v1.2 mount for TwoTrees SP5 / Sapphire Plus

I wanted to mount my HDMI5 centrally on the screen area of the SP5 base - I removed the stock screen so there was room for the cables to route through. I made this case large enough to have the screen perfectly central, cover the hole…

Pobrania
14
Polubienia
5
Ocena
0
P
Printablesnagelwerkstatt

Voron 2.4 tophat with integrated touchscreen [BTT HDMI5 edition]

A 4-piece tophat for the Voron 2.4 (and maybe others, like the trident). Made for and tested on the 350mm and then simply adjusted by -50mm. Why? a lot more Space at the top, now mine can move over 350mm in Z more stiffness (nevertheless,…

Pobrania
11
Polubienia
0
Ocena
0