1 / 4
Voron 2.4 tophat with integrated touchscreen [BTT HDMI5 edition] — zdjęcie 1
1 / 4

Voron 2.4 tophat with integrated touchscreen [BTT HDMI5 edition]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Voron 2.4 tophat with integrated BTT HDMI5

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A 4-piece tophat for the Voron 2.4 (and maybe others, like the trident). 

Made for and tested on the 350mm and then simply adjusted by -50mm.

Why?

  • a lot more Space at the top, now mine can move over 350mm in Z

  • more stiffness (nevertheless, no difference in resonance measurement)

  • integrated touchscreen (if you dont want it, printing the rear left part four times should also work)

  • holes for 6x3mm Magnets to hold the panel

  • printable on the printer to be mounted on

  • stealth look (a bit)

  • integrated channel for the cables

BOM:

  • BTT HDMI5 Touchscreen

  • HDMI cable with a slim connector

  • 8x M5x8 BHCS

  • 8x M5 roll-in-nuts or T-nuts

  • 16x M3 Thread inserts

  • 16x M3 Washer

  • 16x M3x10 BHCS

  • 4x M3x12 Screws (for the Display)

  • 2x 5x28 dowel pin

  • 370x370x7mm acrylic panel

  • ~1kg of Filament

  • foam tape

Tagi