1 / 4
Voron 2.4 tophat with integrated touchscreen [BTT HDMI5 edition] — image 1
1 / 4

Voron 2.4 tophat with integrated touchscreen [BTT HDMI5 edition]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Voron 2.4 tophat with integrated BTT HDMI5

Rating
0 / 5
Likes
0
Downloads
11
Makes
0
Views
84
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A 4-piece tophat for the Voron 2.4 (and maybe others, like the trident). 

Made for and tested on the 350mm and then simply adjusted by -50mm.

Why?

  • a lot more Space at the top, now mine can move over 350mm in Z

  • more stiffness (nevertheless, no difference in resonance measurement)

  • integrated touchscreen (if you dont want it, printing the rear left part four times should also work)

  • holes for 6x3mm Magnets to hold the panel

  • printable on the printer to be mounted on

  • stealth look (a bit)

  • integrated channel for the cables

BOM:

  • BTT HDMI5 Touchscreen

  • HDMI cable with a slim connector

  • 8x M5x8 BHCS

  • 8x M5 roll-in-nuts or T-nuts

  • 16x M3 Thread inserts

  • 16x M3 Washer

  • 16x M3x10 BHCS

  • 4x M3x12 Screws (for the Display)

  • 2x 5x28 dowel pin

  • 370x370x7mm acrylic panel

  • ~1kg of Filament

  • foam tape

Tags