Mounting Arm for BigTreeTech HDMI5 and Prusa Mini
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to attach case to the aluminum extrusion of the Prusa Mini.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
In addition to the screws needed for the original model, requires 2 M3x8 screws and 3030 t-nuts to attach to the Prusa Mini. You will have to supply a right-angle HDMI adapter or cable to get everything to fit.
The USB-C cable bundled with the screen will fit if it's zip-tied down. Alternatively use a right-angle cable. A right-angle adapter will not fit. I did attempt to have the cables exit down through the arm, but it got too flimsy and complicated with the ribbed design. Definitely should have made it a solid shape. For more cable clearance it would be relatively simple to chop this and stretch it, but it will get wobbly.
I was trying to make this as stable as possible so the screen sits somewhat below the base of the printer. The printer will either have to be lifted off the surface it's sitting on or the screen needs to hang off the edge of the surface.