1 / 3
Mounting Arm for BigTreeTech HDMI5 and Prusa Mini — image 1
1 / 3

Mounting Arm for BigTreeTech HDMI5 and Prusa Mini

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Used to attach case to the aluminum extrusion of the Prusa Mini.

Rating
0 / 5
Likes
1
Downloads
20
Makes
0
Views
384
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

In addition to the screws needed for the original model, requires 2 M3x8 screws and 3030 t-nuts to attach to the Prusa Mini. You will have to supply a right-angle HDMI adapter or cable to get everything to fit.

The USB-C cable bundled with the screen will fit if it's zip-tied down. Alternatively use a right-angle cable. A right-angle adapter will not fit. I did attempt to have the cables exit down through the arm, but it got too flimsy and complicated with the ribbed design. Definitely should have made it a solid shape. For more cable clearance it would be relatively simple to chop this and stretch it, but it will get wobbly.

I was trying to make this as stable as possible so the screen sits somewhat below the base of the printer. The printer will either have to be lifted off the surface it's sitting on or the screen needs to hang off the edge of the surface.

Tags