BIGTREETECH HDMI5 Case and Mount SOVOL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can easily be adapted to any printer, has functional buttons and sockets. Only uses the 4 screws that come with screen.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a case and mount for the BIGTREETECH HDMI5 touchscreen.
Features:
- perfect Fit for HDMI5 touchscreen
- fully functional buttons
- access to all ports
- slim design
- press fit face plate for a professional look, blank or with text(will upload an OpenScad file for modifying the text option soon)
- rounded corners
- 2x 4mm dia, 2mm deep holes spaced 10mm apart on the back for gluing on the mount socket, or other mount of choice.
- only screws required are the 4 that come with the HDMI5
- easy to print
The mount uses ball sockets. It is set up to mount on top of the spool holder mounting plate of my Sovol SV06 but can easily be adapted to other printers. Contact me and if I have time I can design mounts for other printers. Or you can make your own easily by using the 2x 4mm dia 2mm deep 10mm spaced holes on the back for alignment while gluing.
The buttons just need to be inserted from the inside before you install the screen.
The face plate prints face down, the case on its back. No supports required for these parts or the buttons.
The mounting arm, case socket, and mount socket for Sovol require support. I prefer tree supports but that is up to you. The mount socket prints socket down. The case socket you can print either way.
I sanded the plastic lightly before I used 5min epoxy to glue the socket to the case.
Enjoy! Post your makes please!!!