1 / 3
BTT HDMI5 1.2 Mount for Troodon 2.0 Pro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For when the magnets kill your touchscreen and Formbot sends you the updated version to replace it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 329
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Mounts to the front of the printer where the original magnetic bracket goes.
The screen that came with my printer suddenly died one day (likely due to the strong magnets placed directly behind it) and Formbot sent me the updated model as a replacement. The mount they provided was… rather subpar, putting it mildly, so I designed my own. This has a bit more of an angle to it and is pretty solid once attached.
Uploaded as STEP files for your tinkery enjoyment.
All you'll need is:
- (6) M3x6 countersunk screws to attach the bracket
- (4) M3 heat set inserts that are 3mm deep (not the regular Voron ones) that go on the sides of the frame