BIQU HDMI5 V1.2 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the BIQU/ BTT HDMI5 V1.2 touchscreen.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 373
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
UPDATE 05Nov2024: Hopefully the changes I made to v1.2.1 address the issues in the comments.
Case for the BIQU/ BTT HDMI5 V1.2 touchscreen. BTT released V1.2 of the HDMI5, which moved the outlets to the rear of the screen and added a small speaker.
Remix of the BIQU/ BTT HDMI5 Case by 3Dwork.io (here: https://www.printables.com/model/306731-biqu-hdmi5-case)
Changes:
- relocated button hole on side of front case cover
- added holes to the back case cover to accommodate relocation of HDMI & USB-C outlets
- added access hole for the RST button
From 3Dwork.io:
Feet are reversible and you can use them with 15 and 30 deg, also includes some zip tie mounts for cable management.
I added some extras to allow use directly to aluminum profiles.
Used M3 and M3 hot inserts.
The case bottom has VESA mounts to allow the use of any Pi case with 75mm VESA mounts. The case I used was the Raspberry Pi 3 B Case from jayftee (https://www.thingiverse.com/thing:1427797). It's a good case design, and fits well.