Low-Profile M-LOK Hand Stop / Barricade Stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sleek, ergonomic, and durable hand stop designed specifically for the M-LOK mounting system.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A sleek, ergonomic, and durable hand stop designed specifically for the M-LOK mounting system. This model is designed to provide better control, consistent hand indexing, and can also function as a barricade stop for stabilized shooting.
Given the proximity to heat and the mechanical stress involved, this model is optimized for high-performance filaments like ASA and ABS.
🛠 Design Features
Ergonomic Texture: Features a ribbed surface for a secure grip in all weather conditions.
Low Profile: Minimalist design that doesn't snag on gear but provides enough surface area for a solid "pull" into the shoulder.
Hardware Ready: Designed to work with standard M-LOK T-nuts and M4 or #10-24 screws (not included).
Strength Optimized: Geometry is reinforced to prevent shearing under tension.
🖨 Print Settings (Recommended)
Because this is a functional accessory, settings are important for safety and durability:
Filament: ASA or ABS (Mandatory for heat resistance near barrels/gas blocks).
Walls/Perimeters: 4–6 (Solid walls provide the strength needed for the M-LOK clamping force).
Infill: 40% - 100% (Rectilinear or Gyroid).
Layer Height: 0.16mm - 0.2mm for a balance of detail and strength.
📦 Hardware Needed
2x M-LOK T-Nut
2x M-LOK Compatible Screw (M4 or standard 10-24)
Support My Work
I am an Engineer who loves designing functional gadgets. If you find my designs helpful for your setup, please consider supporting my work!