Liczymy pasujące modele…
Standard 50mm (2inch) vacuum cuffs tend to work loose in use on many tools and are rather bulky, so I was looking for a simple locking system that would be easily adapted to any tool, so that anyone with rudimentary cad skills could…
I have investigated many different ways of adapting the CAMLOCK system to other vacuum hose dimensions, but the variety of diameters and hose types seems to be infinite. Sadly there is no one size fits all approach. In the CAMLOCK system,…
These are CAMLOCK compatable nozzles from 20mm to 80mm (in 0.5 mm increments). They are compatable with the awesome and award winning CAMLOCK Connector by @peterh . Hints: You may want to flip the prints to have the wider diamater ends on…
DOWNLOAD CAMLOCK and find more accessories HERE. This part will adapt a 40mm vacuum wand to the new CAMLOCK end. It should be a slightly loose fit depending on the taper of your vacuum. I use PFTE plumbers tape to ensure a perfect fit,…
DOWNLOAD CAMLOCK end fitting HERE. This part will make any of my old VACUUM ADAPTERS compatable to the new CAMLOCK end. It will be useful if you want to change over before making new fittings or if you like the new setup but don't want to…
A collection of male adapters to connect to the CAMLOCK system by PeterH . Peters design of the CAMLOCK system is great for simple quick connection to attach various items to a vacuum hose. This model offers a set of 400+ male adapters to…
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting suits a 40mm inside diameter, which will fit generic compound mitre saws and inside many standard vacuum cuffs. It fits perfectly on my Makita saw, to allow easy CAMLOCK…
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 45 to 46mm so it should fit anywhere a standard vacuum cuff would, and connect to the CAMLOCK end. It may be a slightly loose fit depending on the length of taper…
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 23 to 22mm which is slightly less than 1" and is suitable for many Makita and similar sanders, and connect to the CAMLOCK end. It may be a slightly loose fit…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Made to fit a 40mm vacuum hose to an unmodified Hose Fitting from @PeterH's “Camlock Connectors with Magnetic Catch”. At the fitting side it screws in easily, at the hose side it is a bit more snug. If it is too snug, use the Offset Face…
This is an adapter for the Festool Domino Joiner (DF 500). It uses the CAMLOCK connector by @PeterH . Related: Festool Domino Cutter Rugged Case https://www.printables.com/model/710716-festool-domino-cutter-rugged-case CAMLOCK Adaptors…
These are suction-end nozzles for the CAMLOCK connector by @PeterH . There are lots of sizes that can use to suit your needs. The nozzle name format is (end-depth by end-width by end-angle) so the 20x80x60 named nozzle has 20 mm depth, 80…
I am not good at editing stl file, so I redraw it by fusion360. This distributor fits camlock, because my dust collection all using CAMLOCK system. You may need 3mmx40mm support pins to contact two parts, mid body part can be added many…
Änderung (4): Teile können jetzt mit M3 Schrauben verbunden werden Änderung (3): runde Tasten geändert, Zifferntasten zweiteilig Änderung (2): Teil 1 mit Gürtelclip Änderung (1): Löcher für Tasten “7-8-9” angepasst. Erster Entwurf, soll…
This is a vacuum adapter for CAMLOCK that fits a RIDGID Hose. It a remix that was made to fit a RIDGID Hose, specified as the 1-7/8 in Vacuum Hose. The model has a 43.50 outside diameter, with threads, which fits snug on the hose. Made to…
Redukce pro vodní nádrž se systémem camlock (závit L=13mm; D=62mm). Osvědčilo se mi vytisknou nejprve jenom spodních 5mm a vyzkoušet. Celý model jsem tisknul zvětšený na 105% aby krásně seděl. Přiloženy jsou i openscad soubory pro…
Thanks to 3DCorruptionStudio for this cool model https://www.blendswap.com/blends/view/80980 Craig this was all I could find. I'm sure I have a ported release from the game some where. But couldnt find it in amongst my files as yet. Hope…
This is a very simple joining piece for joining two hoses fitted with my CAMLOCK SHOPVAC CONNECTOR. Print it to match your connectors - or not! NOTE - I have not test printed this fitting, however as it is generated from my standard…
Made to fit a 40mm OD vacuum hose, which threads in quite snugly. If it is too snug, use the Offset Face feature in Fusion 360 on the inside of the thread/coil. STEP file is found below. Note that these hoses have a reversed thread so you…
This is an adapter for the Festool Plunge Cut Track Saw (TS 55). It uses the innovative CAMLOCK connector by @PeterH , along with the jcjames_13009 version of the Festool end connector . Related CAMLOCK Adapter: Festool Domino CAMLOCK…
It is a bit of a tight fit for the upper hand guard to fit in. The holes 0.22" for a bushing, and 0.34" for a screw head dia. Beware. There are two versions of the lower handguard, please make sure which one your AK is before printing.
Remixed to accept 32mm hoses, Numatic Henry Hoover is probably the most famous brand to use this size hose, so I can use this system on my Hoover wet/dry vacuum that I use in my workshop. Hose screws into the adapter and then normal…
A design modification to make the original camlock connector fit to a 32mm inner diameter vacuum hose
Made this so I can fit an extension hose with standaard vacuum accessories to the camlock adapter. Hose screws in and other end connects to camlock adapter .
These are vacuum nozzles for the CAMLOCK system. A few select sizes. The nozzle name format is (end-depth by end-width by end-angle) so the 20x80x60 named nozzle is 20 mm deep, 80 mm wide, with a 60 degree end. 20x20x45 20x80x60 30x60x30…
Simple male-male Adapter If you need help, have questions or want to collaborate, please feel free to join my discord server: https://discord.vr6syncro.de If you want to support me or thank me you can do it here Thanks, Alex
I remixed an Camlock adapter to fit all standard DeWalt AirLock connectors. I tested it on all machines I have on hand (noticed that tolerances on my machines differ, maybe you need to rescale the model by about 0,5 to 1 %). For the screw…
This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available. Warning! Don't stuck yourself. Build the model in this order.
Make your hose rotate more easily.
Adapter to convert the Metabo KGS254M Miter Saw dust extraction port to camlock, for use with Peter H's Camlock connector Kudos to Peter for providing design dimensions and helping me out. Printed in Prusa Basic White PLA with 0.2mm layer…
The “Stubby”, the shortest connector for @PeterH CAMLOCK System i could make. You could probably cut it a few mm shorter by removing the flange at the top if you want. Made to fit the dust port of a Makita DRT50Z trim router. Should fit…
A camlock adapter for the Festool TS 55. Fit is a bit tight but will loosen up once in use. You can find the camlock adapter here .
I needed a way to connect my shopvac camlock system to my dewalt sander - so instead of using a variation of adapters, I decided to remix these two. Use the print instructions @exnerd gives on his page
@PeterH has a parametric adapter for his CAMLOCK so my version is obsolete. This adapter screws onto a Ridgid 1 ¼" ID hose then @PeterH's CAMLOCK will screw onto it. I am working on creating a male threaded attachment so the Ridgid…
A Camlock adapter for Triton routers. Threads are made based on a video on YouTube . The fit is very good. You can find the camlock adapter here .
Fits @PeterH CAMLOCK System Simply made the tool diameter larger to fit my Makita SP6000J tracksaw. Printed with a brim to increase bed adhesion in ASA on my Voron 2.4, no supports needed. Fits well without glue or tape. If you want to…
I used the Onshape file provided by PeterH to create a CAMLOCK adapter for my Makita DHS660Z. It's designed to be friction-fit and shouldn't come loose, but it depends on the tolerance of your printer. This should work on any tool that…
Gun for Transformers "Power of the Primes" Grimlock. Has a 5mm peg so will fit other modern 'bots as well. This Grimlock figure doesn't come with a gun as standard, so I modelled a replica of the Masterpiece weapon and scaled it…
This is a CAMLOCK compatible detailing attachment for a shop-vac. The model is a little over 238mm tall so it will print on an Ender 3 or larger. This works with the CAMLOCK 50mm system found here I have included the step file for anyone…
Original Makita bypass is for easier connection to the vaccum hose of the LS1219 / LS1219L / LS1019 / LS 1019L by @Tobi Höher. https://www.printables.com/de/model/559368-makita-ls1219-ls1219l-ls1019-ls1019l-vacuum-adap This model is a…
I needed a stand for my Space 1999 Commlock and couldn't find one so I created it based on a few still pictures from the TV show. Created in Blender and printed on my Prusa Mini+. The base part is optional. My Commlock has electronics in…
Bobble the head of your favorite Dinobot Commander! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from the…
Adapter von CAMLOCK zum Standard DN50 HT-Rohr für zentrale Absaugungen in der Werkstatt.
Adapter to convert the Skil 1340AA Table Saw dust extraction port to camlock. I think 1340AA is the European version of the Skil 15 amp 10 inch saw (TS6307), no idea if it will fit but they look the same. For use with Peter H's Camlock…
I created these to combine male/nipple 1.5 inch camlock fittings with 1 inch, 1.25 inch, 1.5 inch male NPT threaded and also 1.25 inch female NPT threaded fittings, as well as 1.5 inch barb. This is so I can quickly connect and disconnect…
These are female threaded inlet and outlet made for Dronnn's cyclone separator. https://www.thingiverse.com/thing:2829268 I chose to go with female threads since it offered more flexibility for the oddball collection of hoses that I have…
A camlock adapter for the Bosch GTS 635-216 saw. It might fit other Bosch models but I have not been able to test that. You can find the camlock adapter here .
A template for drilling holes for dowels and camlocks. The cutter guide can be held with 4 m6x20 allen screws, 2 on both sides. The template requires: 3 bearings type 686 size 6x13x5mm for 6mm drill for 2 dowels and camlock spindle 1…
58mm OD CAMLOCK adapter for use with older ShopVacs with non-locking connections. It can be used to connect to the vac itself or for the tools that came with the vac. No supports necessary when printed with the 58mm section down. The stl…
You can use this CAMLOCK adapter to replace the vacuum port on your TS55 EBQ circular saw. Just remove the blade cover with the five screws remove the old curved one and put this in its place, put back the cover and the screws. Plug into…
Dewalt cam lock adaptor to Ridgid 1 1/4 vacuum hose
Used the male camlock design from Peter H to develop a dust connection for a Bosh GEX 18V-125 sander. It doesn't need supports to print, can be printed in PLA or PETG, layer 0.3 mm
Always annoyed me that the GCM/GTA saws has this proprietary dust port. With the CAMLOCK this idea came to me. The Bosch-part of the design is borrowed from: https://www.thingiverse.com/thing:5259888
CAMLOCK Adapter für Mirka Deros Exzenterschleifer
CAMLOCK adapter for Festool Tools. Picture is on an RO150, but I use the same adapter for all my festool tools.
Works with this cyclone: https://www.thingiverse.com/thing:2018105
I needed for my Jaded immersion chiller a connector from GHT to Camlock. Here it is.
Models print in the same orientations as the original parts, make sure to tune your printer to get the tolerances for the printed thread of the camlock screws right. In addition to the original v0.1 hardware you will need: 2x m3 washer 2x…
This is an adapter designed to fit the Fein vacuum hoses that come standard with the Turbo dust extractors. Compared to the original fitting, it is sized for the 45mm diameter hose fitting and shortened. Printed at 0.2 with 25% infill and…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://mz4250.com/ Patrons have access to all my files in one place, a request…
This CAMLOCK adapter can be used to connect tools with standard 35-36mm ID fittings. Adapter external diameter is conical 35 to 36mm. To be used with the CAMLOCK connector from @PeterH. I designed this with FreeCAD using @PeterH's…
If you want to make proper, precise remixes of the main CamLock hose end, the author does not provide STEP or other proper CAD source files. I remade his design and am providing the STEP file for anyone to work from. The current model has…
Remixed and combined my "go-to" variant of the bosch professional dust connection with the coupler for the camlock universe. A little bit support on the edge is needed.
It's Grimlock! http://www.itsg1ish.com/models/09d21e0a-dbe1-45b9-ba2f-caac0abc8c58
Designed to work with @PeterH awesome camlock design. Can remain in place when using original dust collection bag.
When I first started designing random things to 3D print, my girlfriend had a dream that I made a puzzlebox. This is my best go at making her dream puzzle. So, here's the Dreamlock. You don't have to buy anything else, just print it and…
Why and wherefore If you have started to use the camlock hose adapter ( https://www.printables.com/model/461256-shopvac-50mm-camlock-connectors-with-magnetic-catc ) by @peterh , but you still want to use your old Starmix hose-ends/nozzles…
The Makita DSP600/SP6000 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
I was tired of the handle when using power tools. The locking ring broke, which made me adapt to the camlock system. Preconditions to use this adapter: You need to cut the hose to use it. You need the female Camlock adapter:…
Designed to work with @PeterH awesome camlock design. Will fit all Ridgid stand tools such as table saw, band saw, planer, chopsaw, spindle sander.
I've printed them in PETG because of the flexibility of the clip that snugs in the holes of the nozzles. Other than that printed on default 15% infill and a 0.2mm layer height. In combination with the different size hose adapters I'm able…
Camlock adapter for Centec hose systems. I haven't printed this, nor do I have a Festool to test it on, but it should be a solid fit from the models I could find.
German: Modifizierte Version für DN40 Rohre und Adapter. Kann auch für PVC-Kugelhähne verwendet werden siehe Bild. Der Hebelel wurde modifizert das der Magnet leichter rein geht und das er im offenen Zustand nicht mehr am Verbinder…
Made to fit my Makita DJV182 jig saw, which has a 23mm ID connection to attach it to a shop vac. The 23mm OD side of the connector tapers to one side of the connector to allow clearance between the Camlock Connector and your worksurface.…
I needed to adapt my shop vac to my sander without using loads of pipes, as I started using Peter H's brilliant Camlock system, I've been on a journey to adapt all my hand tools that need dust collection to it - luckily Peter has many…
A 90 degree elbow for the awesome CamLock system. Incorporates my modification to the magnets. There is a small slot that the magnets push into so you don't have to add the magnet during the print. The magnets will stay in the slot, I've…
The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…
I recently printed and converted my workshop to use the CAMLOCK system designed by @PeterH - it is AMAZING! In doing so, the adapters he designed didn't fit the hose I purchased, so I redesigned to fit. Hose I bought:…
GoPro HERO4 Session M-Lock mount case with 2mm thick plexiglass. There is a cutting template, it will help you to cut the plexiglass to size.
This is an adapter to connect the standard FESTOOL Kapex KS 60 E miter saw vacuum port to a SHOPVAC camlock connector. On side A is the festool part and on side B the camlock male part. An additional thanks to…
This is a cartoon-accurate model of Dinobot Grimlock's blaster from the OG Transformers cartoon. It fits on a standard sized FDM printer bed, and there are a couple places to optionally support the blaster with ¼" and ½" dowel. (The…
Material: PETG Resolution: 0.2 Infill: 100%
You can use it to connect the female CAMLOCK fitting to the port on an Amazon Basics Vacuum Compression Space Saving Storage Bag .
(Wasn't sure which 3D model I was supposed to use as my “remix source”, so I went with the one that had the instructions for making your own male connections) Long story short; I recently started using the CamLock system this model…
Clamlock Wall Mount & Base Plate for your fish house. 2 different base plate models included, one for 10-24 machine screw heatset inserts, and one for using 10-24 nuts. Category: Gadgets
add glued top flange for camlock
CAMLOCK adapter to fit a Dewalt DW735 planer.
My attempt to create a Grimlock for RPGs. You may need to resize this mini to fit your RPG needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
Thanks to @PeterH for his "SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH" and accessories. Using the same principle I made this suction nozzle so I can quickly disconnect the suction from the dust shoe and connect it to the…
I wanted a reliable way to have flexible dust collection around the workbench, as I have already rolled out CamLocks and installed T-Tracks, blending it with the Flexible Hose Link seemed like the perfect way forward. I designed this…
I wanted to use old vaccum cleaner hoses in my workshop as an upcycling project and also to save some money on those expensive hoses. Printed Kipnugget's adaptor to the Camlock fittings but while it fitted on one hose i had, the two from…
Sadly no better Images at the moment. But if you own the Machine you will know what it is for. Links to the other Models you need: https://www.printables.com/de/model/338478-flexible-hose-link-fusion-360…
The inserts here are designed for Bosch vacuum hoses with factory wands. I wanted to keep the wands attached to the hoses and still take advantage of Peter H's 50mm camlock system. You can make an insert for any wand up to 40mm OD. To…
Better printed in resin, but should work in FDM.
Drilling dust collector, works hands free even on rough blockwork. Tested on a 1500W Vacmaster Power 30 PTO.
Reemix of the sander vacuum hose adapter for the GEX 40-150 Bosch by Vicente Adauy to fit the universeral Shopvac Camlock coupling by @ Peter H :…
This adapter will let you connect a brewzilla or modified grainfather to a PET thread to easily connect to beer taps using the kegland carb caps, for beer line cleaning at the correct temperature for your cleaning chemicals, like pbw,…
