Ridgid 1 1/4" ID hose adapter for CAMLOCK system
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to allow @PeterH's CAMLOCK fit onto a Ridgid 1 1/4" ID hose
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 179
- Wydruki
- 1
- Wyświetlenia
- 1066
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
@PeterH has a parametric adapter for his CAMLOCK so my version is obsolete.
This adapter screws onto a Ridgid 1 ¼" ID hose then @PeterH's CAMLOCK will screw onto it. I am working on creating a male threaded attachment so the Ridgid flexible hose tip can be attached to the CAMLOCK but it isn't ready for prime-time yet. I will post it (probably to this model) when it is ready.
No support necessary provided the inner rim is orientated to the bed. The stl is in the correct orientation.
There may be some small holes in the printed model where the minor diameter of the internal and external thread are together. This is not a problem. The adapter works fine.
I recommend installing the adapter on the hose first as it will only fit one way. Once on the hose, install the CAMLOCK. Adhesive between the adapter and the CAMLOCK is not necessary but if you choose to use some, follow the assembly recommendation above, get the CAMLOCK started on the threads, apply a small amount of adhesive then screw the CAMLOCK on the rest of the way.