1 / 3
Recyclings Bins for Prusa Core One / + with Magnet retrieval
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original model didnt allow for getting the magnets back out again. Hence I remixed it.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Print it using the settings from the 3MF file. It should be suitable to use speed or balanced profiles, but only structural provides a constant speed other the whole model which in turn.
There are four mouse-ears on each of the bins to secure it while printing. Cut them off with wire cutters after the print finished. The stl. versions must be placed on those ears in order to make the print support free.
9x3mm magnets shall be used.