Creality K2 Riser (NOT for PLUS or PRO Models) Vented or Solid - No Supports Needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nice and slim Riser so the PTFE won't rub on the Glass lid and gives some Air Flow to help keep cooler inside
- Ocena
- 4,75 / 5
- Polubienia
- 52
- Pobrania
- 338
- Wydruki
- 3
- Wyświetlenia
- 1862
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 16/01/26 - A few people have asked for a non vented version.. This has now been added to the files, If you want the non vented version just change printing the Main body parts and print the non vented files instead (you still need the connectors for either version)
This is what I wanted from a Riser for my K2
Slim, Vented, Nice looking, Not lift the CFS to high, Stop PTFE Tube marking the Glass lid
I have added a couple of extra inserts in the files incase you don't like the mesh ones that I used, There's a solid version of the creality logo with just small hole in middle to still let some airflow & ive done a thin version if you want just a bit of colour. Or you can leave the logo/inserts out altogether.
Printing is pretty standard, but ask if you're not sure. You print 2 each of the front left & 2 each of the front right & then that gives you the 4 pieces of the frame you need. Print 8 plugs & 40 inserts of your choice. I do suggest to print a test insert and make sure of the fit before printing all of them and if they won't fit the just scale down in the slicer a couple of percent in the X,Y direction. They have been designed to fit, but if your printer/filament calibration is out a bit they may not fit and need a bit of scaling down. The PLUGS to join the frame together, ive added a .2, .3, .4 Print one of each and see what fits best for you. I used the .2 and it was a nice firm fit and the whole frame holds together without glue.
The Logo inserts need to be glued into place, which is very easy. I just put a tiny drop of super glue on the 3 tips of the logo and it holds them perfectly.
I added some 1mm foam tape around the lip where the glass lid sits, you don’t have to do this but I did to stop any chance of rattles etc. One other thing I did and suggest is I gave the ends of the frame parts where the plugs go into a nice light sand to make sure the ends mate together nice and clean and I got a nice clean fit.
Feel free to ask question if you need help & don't forget to share your Make.