8020 Moza R9 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for use with 120mm with extrusion
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This was a stop-gap while I had a mount on order from Sabelt, but it completely exceeded my expectations and may have continued to use it if I haden't already order a permanent replacement.
I used it on my SimLab P1X Pro, the wheeldeck version wasn't available so I got the front mount version with the upgrade path of possibly getting a front mount wheelbase some day. Mounted it with 24mm M8 bolts + Washer. Designed for standard Moza mount spacing of 78.4mm x 66mm WxH.
I printed with PETG, but if you plan to use long term, ABS or Nylon would likely be better.
Theres no perceivable lateral flex as the wheel turns, but there is a slight vibration if you hit the top of the wheel (which shouldn't be an issue while racing ;) )