8020 Moza R9 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for use with 120mm with extrusion
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 22
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This was a stop-gap while I had a mount on order from Sabelt, but it completely exceeded my expectations and may have continued to use it if I haden't already order a permanent replacement.
I used it on my SimLab P1X Pro, the wheeldeck version wasn't available so I got the front mount version with the upgrade path of possibly getting a front mount wheelbase some day. Mounted it with 24mm M8 bolts + Washer. Designed for standard Moza mount spacing of 78.4mm x 66mm WxH.
I printed with PETG, but if you plan to use long term, ABS or Nylon would likely be better.
Theres no perceivable lateral flex as the wheel turns, but there is a slight vibration if you hit the top of the wheel (which shouldn't be an issue while racing ;) )