1 / 1
Shelf for Yamaha P-115 digital piano — zdjęcie 1

Shelf for Yamaha P-115 digital piano

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shelves for mounting (small) studio monitor speakers directly on a Yamaha P-115 digital piano

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
102
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a shelf for studio monitor speakers that directly attaches to a Yamaha P-115 digital piano.

Special design care has been taken to ensure that:

  • the shelf is installed non-destructively on the piano

  • load and vibration on any part of the shelf does not cause it to fall off the piano

As a result, it is very specific to this model of piano. It may work with other pianos in the Yamaha P series, but this has not been tested. I have included the Fusion source files so you can adjust the profile for your piano or make the shelf itself more suitable for your monitors.

The monitors shown are the PreSonus Eris 3.5BT (affiliate link). I wouldn't recommend putting monitors much larger than these on this shelf.

Printing

You will need to print three parts:

  1. left bracket

  2. right bracket

  3. shelf top

The STLs should already be in the correct print orientation. If they aren't, pay special attention to the lip on the brackets that grabs behind the piano keys: on the first layer, the lip should be continuous with the rest of the part. It should not be attached to the print bed by a single point.

I have also provided a combination STL for the left and right brackets that can be used if it fits on your print bed.

I printed in PETG at 0.2mm and made no modification to my printer settings.

Supports are not required.

Installation

You will need M5 flat head self-tapping screws that are 20mm long. As pictured, I used these (affiliate link). Slide the brackets into each other, place the shelf on top of them, and slowly screw the shelf into place.

Then slide the assembled shelf onto the piano from the front. Make sure that the lip goes above the red felt to protect the keys.

Tagi