ICOM IC-7100 Powerpole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the 4-pin Molex power connector on an ICOM IC-7100 with an Anderson Powerpole
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 377
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This completely replaces the power connector assembly meaning this mod is reversible (although it probably voids your warranty).
Parts needed:
2 M3x10 cap-head screws
2 M3x5x4 heat set inserts
2-pin Powerpole connector with cut-to-fit wires and ring terminals
Ferrites for the internal power leads (optional but they're on the factory connector)
The connector has an ok friction fit, but to ensure it doesn't slide back into the radio I superglued it to the inner print. One could definitely make a part that uses the Powerpole joiner, but I'm fine sacrificing a connector to this radio.
Printed in clear PETG for strength, but I'm sure PLA would be fine as long as you're not beating on it.