Reading Light Powered Home Alone House Decoration/Nightlight

This 3D printed nightlight is an intricate ornamental replica of the famous Home Alone house, with thoughtfully crafted windows that emit a cozy glow when lit. It doesn't need any wiring or electronics because it is made to use a standard USB reading light installed inside. This model, which was developed as part of the Winter Holidays Decorations 2025 contest, is ideal as a nightlight or seasonal display for desks, shelves, or bedrooms. It adds a warm, festive touch inspired by a classic holiday film.

Assembly:

First, paint all of the bricks with a sponge painting technique (a paper towel works just as well). All of the pieces connect with glue. Next, connect the roof to the main body. Then, attach the top windows. Next, add all of the panels around the main structure. Finally, attach the window shutters and door to the front panel, Put a light source behind it, turn it on, and let it glow.

What to print:

.3MF Files:

Use the "Home-alone-house-large-printer.3mf" if you printer has a x and y dimension greater than 300mm. If your printer is smaller use the model called "home-alone-house-small-printer.3mf"

.STL Files:

1x "Home alone house main.stl"

1x "home-alone-front-bricks.stl"

1x "Home-alone-roof.stl"

1x "home-alone-house-door.stl"

2x "home-alone-top-window.stl"

2x "Front-outside-wall.stl"

2x "outside-side-wall.stl"

2x "inside-side-wall.stl"

8x "home-alone-mid-shutter.stl"

10x "home-alone-small-shutter.stl"