1 / 2
landis gyr t330 - Ultraheat — zdjęcie 1
1 / 2

landis gyr t330 - Ultraheat

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Camera Mount for ESP32 Cam

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Action Cam Mount for Landis GYR T330 Ultraheat 

used to add a the heat meter counter to smart home in combination with an ESP32 cam, the mount below and some extensions ( 1 x 120 mm , 2x short arms of the phone stand model, and some other things from here https://www.thingiverse.com/thing:2584426

Store the  win Example file as *.py and modify some settings ( IP Addresses, MQTT user and pw )

If you run the script on Windows some windows will open  - showing the stream with a rectangle. Try to position the 7 segment counter in the rectangle . 

Additionally a window shows the cutted and filtered counter value. 

This cutted image is divided to 7 digits. Each digit is overlayed with a  defined 7 segment mask. This is shown in other pictures.  

The last picture shows the decoding result. 

The ESP32 cam configurations is, but depends  on the angle (reflection on the display is a problem) 

qualitiy ca 8

brightness -3

contrast 3

saturation 4

sharpness 3

de noise auto

exposure level 5

gaincangeling mitte ca 256

special effect grayscale

awb enables true

adwanved awb true

manual awb off

aec enable on

nigth mode off

agc on

gma enable on

lens correction off

H-Mirror on

v flip off

bcp on

wpc on

color bar off

LED intensity 255

Tagi