landis gyr t330 - Ultraheat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera Mount for ESP32 Cam
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Action Cam Mount for Landis GYR T330 Ultraheat
used to add a the heat meter counter to smart home in combination with an ESP32 cam, the mount below and some extensions ( 1 x 120 mm , 2x short arms of the phone stand model, and some other things from here https://www.thingiverse.com/thing:2584426
Store the win Example file as *.py and modify some settings ( IP Addresses, MQTT user and pw )
If you run the script on Windows some windows will open - showing the stream with a rectangle. Try to position the 7 segment counter in the rectangle .
Additionally a window shows the cutted and filtered counter value.
This cutted image is divided to 7 digits. Each digit is overlayed with a defined 7 segment mask. This is shown in other pictures.
The last picture shows the decoding result.
The ESP32 cam configurations is, but depends on the angle (reflection on the display is a problem)
qualitiy ca 8
brightness -3
contrast 3
saturation 4
sharpness 3
de noise auto
exposure level 5
gaincangeling mitte ca 256
special effect grayscale
awb enables true
adwanved awb true
manual awb off
aec enable on
nigth mode off
agc on
gma enable on
lens correction off
H-Mirror on
v flip off
bcp on
wpc on
color bar off
LED intensity 255