756 models
The orange Gyro 7 in the pictures is printed in 0.20mm layer height Printing Material: PETG (PLA makes the joints too loose when using the normal skeleton and too tight for the tight Skeleton . Assembly is also more difficult in PLA.)…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET
Remix of a remix :) The original part didn't last a week - the tab on the outer ring broke from fatigue. Here's a redesigned version with a stronger (and simpler) mount. Enjoy! Print instructions Use supports
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
This is a remix of this thingiverse post: https://www.thingiverse.com/thing:2965408 If you find the models useful please like and share with friends. I will upload more versions with different logos when I have the time. Feel free to…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Created in PrusaSlicer with modifier meshes, read this tutorial to learn more: https://blog.prusaprinters.org/model-with-prusaslicer-modifier-meshes-tutorial If you slice this yourself, make sure that the infill anchoring is set to 0.…
Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant
This simple gyroscope fidget prints in about 45min and spins remarkably freely. I usually carry several of these to give away as gifts, and they are some of my most popular prints
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
MEMS Gyroscope 100:1 scale model of a MEMS Gyroscope. https://en.wikipedia.org/wiki/Vibrating_structure_gyroscope For demonstration purposes only, but doubles as a nice fidget too :) Printing: Printed in PLA. Print without scaling for a…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
This is a re-mix of a re-mix, based on this: https://www.thingiverse.com/thing:3442346 Note : If you want to use this as an actual planter, PLA prints can be "leaky." I took the precaution of giving the inside of the prints a coating of…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
This is a quick printing Filament Guide, made to bolt under the stock spool holder for the Ender 3 V3 SE/KE using the stock bolts that came with the printer. Now with Gyroscopic action. Printed with PLA @180mm/s, 0.10mm layer height, w/…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Gyro Fidget Toy – Print-in-Place This gyro fidget toy is a compact and satisfying 3D-printed design featuring multiple interlocking rings that spin smoothly inside each other. The motion creates a calming and engaging experience, perfect…
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant
This is a via modifier meshes customizable Lampshade for E14 LED lamps. I also included STEP and f3d files so you can easily remix it :) You just need a E14 socket with a cable and a E14 LED lamp, the rest is 3D printed. I printed my…
Print approx. €11.37–€13.89 excl. taxPreliminary estimate for one variant
This is a remix . Its based on https://www.thingiverse.com/thing:757884/files. Its 50x50x50 (and not 80x80x80 as the original). I have cut a couple of milimeters on the base of the original model in order to increase the surface touching…
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
iPhone 13 - Gyroid cover - Light weight
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
This 3D model is a coffee cup holder that attaches to a stroller, making it a must-have for parents who enjoy a hot drink while on the go. The holder includes several parts that can be 3D printed and assembled with the help of some…
Print approx. €8.44–€10.32 excl. taxPreliminary estimate for one variant
Pen Holder Gyroid Round (80mm and 100mm diameter) Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Stifthalter Gyroid Rund - (80mm and 100mm Durchmesser) Stl-Dateien…
Print approx. €4.29–€5.25 excl. taxPreliminary estimate for one variant
Replacement blades for the Durafly Auto g2 V2. The blades are designed to be printed in 3 pieces with ColorFabb LW-pla (regular PLA may also work). Print vertically with no supports, no infill, using the supplied config file. I found that…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
I made this Gyroid look organizing box for TV remotes. Recommended 3D printer's settings: Material: PLA Resolution: 150um Infill: 15-30% Feel free to make your own Gyroid TV remote box! Print instructions Ready to print for i3 MK3/S gcode…
Print approx. €7.39–€9.04 excl. taxPreliminary estimate for one variant
Looking for a quick, fun print? You've come to the right place. This 4 Ring Gyro Fidget is a model that is very easy to print and very fun to use! It's 4 Rings turn independently and make for a very fun toy! Print yours today! This was…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Visible Gyroid infill is nice on a lamp shade, no direct light in your eyes. Remix your own cap, e.g. pear leaf'd. If you dont know how to slice.. Open Slic3r (Prusa 1.4.1+) Print settings Perimiters: 0 Solid Layers: 0 Infill: Gyroid. In…
Print approx. €17.94–€21.93 excl. taxPreliminary estimate for one variant
A simple multi-piece print-in-place heart that rotates within itself. Two versions included, one with an embossed name, and a blank file too. Print instructions Highly recommended to print this with a raft as any elephants foot on the…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for PETGSource material: PET
Gyro-style fidget spinner featuring 7 interconnected rings, each rotating on its own axis. The smooth, multi-directional motion creates a mesmerizing kinetic effect that’s perfect for fidgeting, calming your mind, or productive…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Simple Christmas decoration. It is printed in one piece. Print instructions Model is designed for 0.6mm nozzle and 0.2mm layer height and two perimeters. The width of rings is width of exactly four perimeters. It should be printable with…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This is a simple little gyroscopic keychain I designed in Fusion 360 following the Product Design Online tutorial as a guide. I took it a step further and set it up as a multi-color MMU print.
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for PETGSource material: PET
For the toy to work, you need to use random seam position! A tiny gyro-style fidget spinner featuring 5 rotating rings, each spinning smoothly around its own axis. Despite its compact size, it offers a surprisingly satisfying kinetic…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Bowl Gyroid Round (160mm diameter) Stl-File (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Schüssel Gyroid Rund - (160mm Durchmesser) Stl-Datei (ohne Konfiguration)…
Print approx. €7.61–€9.30 excl. taxPreliminary estimate for one variant
Remix of the Extruder Gyroscope Print in place with press fit magnets This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets It is made for the Purse Mini+ but should be compatible with the MK3 / MK4 If not, let me know…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
“Gyro the Dodo - Ultimaker Special” is an awesome test print originally developed by an artist named Virtox to show off the capabilities of Ultimaker printers. After building my MMU3 and ordering some BVOH for soluble supports, I was…
Print approx. €22.14–€27.06 excl. taxPreliminary estimate for one variant
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
Remix of a remix of a remix :) I draw the socket that fits the MK4 Motor and keeps the gyroscope steady.
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
Get ready for endless fun with the 5 Ring Gyro Fidget! This design isn't just mesmerizing to play with, it's also a breeze to print. With its straightforward structure, you'll have it off your print bed and spinning in no time. Once…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant
This is a model of an aircraft gyro, to demonstrate how the gyro measures the aircraft's attitude. This model is almost completely 3d printable with the exception of glue and string. The string is used as a rip-cord to spin the gyro. Make…
Print approx. €7.36–€9.00 excl. taxPreliminary estimate for one variant
This lamp exposes the gyroid infill that's normally hidden away inside the model's perimeters. Add an light to make it a lamp or use it as a decoration. Print instructions The two 3mf files contain the height range settings to expose 50mm…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Paperclip Holder Gyroid Stl-Files (without configuration) 3mf-Files (with configuration) for MK3S and Mini Printfiles (G-Code) for MK3S and Mini Büroklammern Spender Gyroid Stl-Dateien (ohne Konfiguration) 3mf-Dateien (mit Konfiguration)…
Print approx. €2.94–€3.59 excl. taxPreliminary estimate for one variant
I split the two contrast color rings so that you can use manual color changes for only 4 layers on each side. I'll attach my modified gcode along with 3mf and f3d. Note, 4 layers assumes 0.2mm layer height e.g. 0.8 mm. Attribution for CAD…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
My version of a gyro spinner. Use all supports when printing too. 2, 608-spinner bearings 1, 4x50mm bolt 1, 4x70mm bolt 2, 4mm locking nut 3, 3/4" Stainless Steele Nuts from Ace Hardware
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Check out some of my other fidget keychains! Captain America Gyro Fidget Triangle Gyro Fidget I wanted to recreate a model that I came across by offering a few size options along with some aesthetic changes. Here are four different sizes…
This fidget spinner is print in place and I included both versions with or with out a key ring. If you have a dual extruder printer I also included each loop as its own part so that you can vary the color. I drew this in OnShape and I…
Teren Tire Fidget print-in-place I'm currently having fun modeling moving things that can be printed Print-in-place. I also enjoy modeling off-road wheels, so I combined these two hobbies into this model, I hope you enjoy it!
This is a fidget gyroscope. It spins and doesn't have any pins so you can rotate it in any orientation Notes: The proportions change as the number of rings increases. The smaller the number of rings, the smaller (in height) I made the…
This is a gyroscopic fidget spinner designed as a visually satisfying and smooth-spinning desk toy. The model consists of multiple nested rotating rings , which freely spin inside each other thanks to precise clearances and a fully…
Check out some of my other fidget keychains! Captain America Gyro Fidget Square Gyro Fidget What shape is superior to the square? Here are four different sizes that print quickly and are a lot of fun to fidget with. They'll make a great…
this is the latest of my gyro rings remix pack, to view the complete collection click the link below, https://www.printables.com/@MSBstudios_2395520/collections/2557591 as the rest of the rings this is a simple print: 15% infill is…
There are a couple of problems with most of the 3D printed flying rings: Firstly, it's difficult to get the right mass distribution with 3D printed plastic. Secondly, they are damnedably difficult to throw with the proper spin, and liable…
Tired of your drink tipping over while you're zooming down the sidewalk, weaving through traffic, or just trying to enjoy a cold one on your ride? Meet the Gyroscopic Can Holder. Designed for 22mm handlebars (bikes, scooters, strollers,…
This is an updated version of my original minimalist Glasses Stand. I wanted a design that was complex and bold while still being a practical model that could be used every day. The gyriod structure is mesmerising to look at and is also…
Introducing the straight cut planetary gear fidget spinner and gyro combo. Best of both worlds with a geared fidget spinner and a gyro on the outside. Also, a great gift idea for those who like to assemble things before using. Both .stl &…
This is a simple Heart-shaped gyro keychain which should print easily on most 3D printers! It would also be a great present for Valentine's Day! I hope you like it! Any feedback is greatly appreciated! Print instructions This model has…
A simple gyro spinning fidget toy. Make sure to rotate the model in slicer to print flat on the bed. I recommend .1mm layers for best effect. If the model comes out and doesn't move freely, keep playing with it and it will start to…
I designed this hook to hang bags on our Mountain Buggy Duet stroller. This is a version with gyroscopic cupholder. To assemble it you need 4 M2.5 screws with nuts and to secure them I use Loctite glue. Hook_with_holder should be printed…
As I said above. Normal settings
This model is of the steel ball weapon from the anime Jojo's Bizarre Adventure. A step version is included to facilitate modification. I had luck printing the halved version (print two copies as the halves are identical) at 0.1 mm layer…
This is my design for self leveling / gyro cup or a MUG holder. You can install on adult walking aid, baby stroller handlebars for bicycles. I was inspired from the design…
This is my fourth iteration of the fiendishly clever walking toy invented by my friend John Jameson back in 1981. It mechanically gears a spinning gyroscope (made of 104 pennies!) to a cam which pushes a pair of feet up and down. When one…
BOM: Printed with ROSA3D High Speed PLA Pink Looking for a unique, small gift for Valentine's Day? This gyroscopic fidget toy features multiple concentric rings that rotate independently around a central heart. It is designed as a…
The lamp is a complete redesign of Evocato 's “ Gyroid Lampshade ” and uses an E27 instead of an E14 lamp base by default. Most parts of the lamp can be cutomized in Fusion 360 using its parameter feature, for example if you have another…
This cupholder has a way better point of gravity for better functionality of the gyroscope. It should be mounted with common M5 screws and nuts, please use nuts with thread lock. There are also four space holders which should be mounted…
Keep your drinks stable and spill-free with this innovative gyroscopic can holder! Designed to attach securely to your belt or pocket, this holder uses gyroscopic principles to maintain your 33cl can in a level position regardless of your…
A set of fidgets for those with ADHD. I printed them at .2 mm resolution to get the best time and feel. Make sure your printer is dialed in for the gyro rings. DO NOT PRINT WITH BRIM OR RAFT.
These are a couple of gyroscope fidget toys I designed and after playing with/testing them I think they are ready to share! Both the disk and cog at 100% are about 80mm in diameter and 24mm tall. 0.4 or 0.6 nozzle, No supports, 3…
A simple but fun Gyroscope Fidget. It is Print in Place and should work after breaking the rings free. Rinse it slightly with water for smoother movement.
A simple but fun Gyroscope Fidget. It is Print in Place and should work after breaking the rings free. Rinse it slightly with water for smoother movement.
0.2mm layer height %10 infill 3 top and bottom layers 0.4mm nozzle
This little gyroscope is my new favourite fidget toy. The middle coin can be replaced. I already uploaded a few versions, but feel free to remix it. I've added an empty coin which can be easily edited. Printing Frame: Both PLA and PETG is…
This is a model of a Gyroid Surface. What's a Gyroid? https://en.wikipedia.org/wiki/Gyroid "A gyroid is an infinitely connected triply periodic minimal surface discovered by Alan Schoen in 1970." Glad we cleared that up. To put it another…
Gear rings are nice fidget toys, and "gyro"/gimbal mount rings are nice fidget toys, so why not combine them? The gimbal mounts are so smooth, you can blow at them to bring the so quite some speed. Other fidget gear rings are available…
My Flight Simulation Sixpack Family keeps growing: A fully 3D printed Gyro Compass. Articulation by two standard stepper motors similar to the Altimeter and an encoder for the Heading Bug adjustment. UPDATE 2024-12-21: Fusion 360 source…
A gyroscope fidget toy. It was printed at 0.2 layer height an 10% infill. It should be able to spin right of the build plate.
Aquarium Cave Collection is a range of stunning aquatic hideaways designed to enhance your underwater world. With three distinct models to choose from, you can transform your aquarium into an enchanting aquatic paradise. Low Poly Cave:…
Have you ever thought of combining a bearing, a gyroscope and a gear fidget toy? Probably not, but here it is, and it is a true adventure for both your fingers and your drifting mind. It is easy to print and assemble, and it needs no…
A fun little fidget toy gyroscope with each layer showing whole notes, half notes, quarter notes, and eighth notes. I had hoped to use more authentic looking music note graphics, but they involved too many overhangs that would have…
Halterung zum Transport des Buggyrads an der 25x25mm Deichsel (Qeridoo Kidgoo 2020/2021) ggf. auch andere Modelle
Gyroscope Fidget toy (keychain) Keychain with ring or without. Printable at the size you prefer. If anyone has any questions please contact me, THop3D
Design Concept This 4 Ring Gyro Fidget Keychain is a compact and portable remix design meant to provide a calming fidgeting activity. Circular rings nest inside each other, offering a smooth spinning effect. Use Ideal for stress relief…
The original model is super cool, but it has one flaw - when you print something fast and the printer shakes vigorously, the silica boxes sometimes hit the spools. To avoid this, I made the back bottom of the box rectangular so it would…
Habe es noch nicht gedruckt, nur einen Remix erzeugt
Check out some of my other fidget keychains! Square Gyro Fidget Triangle Gyro Fidget I split the model into parts for faster printing. This model is for multicolor printers because of the center. When assembling, start with the center…
Just another Christmas Ornament. If enough force is applied the rings will leave their socket but they will not fall out by themselves as there is a gap of of only 0.25 between the parts, which is easily overtaken by the roundness of the…
This is a bicycle handlebar-mounted gyro with a suspension system that keeps your drink perfectly upright - even over rocks and little drops ! By combining a two-axis gyro with a miniaturized spring‐damped suspension, it isolates the can…
Renault logo rotatori keychain
I had huge issues with layer delamination on the original model, I think the frequent z-axis up-and-down led to stepping errors. In addition the printing just takes ages. So I thought, why not use the features of the slicer. The gyroid…
A small gyroscope fidget toy Print flat, on its side, recommended to use either no adhesion or raft , do NOT use brim! Mines was printed with 0.15 layer heights, 3 walls thick Should take around 30 minutes to print
When you take it off it might not be spinning so easily. So just keep playing with it and it’ll spin.I have also made a 5 ring gyroscope https://www.printables.com/model/605104-5-ring-gyroscope-smooth-spinning
The hexagon is one of my favorite geometric shapes for designing, so I created this fidget. It has an eyelet and can also be used as a necklace, as a Christmas tree decoration and - last but not least - also as a calibration test for your…
This design was modeled it after a Jaeger-LeCoutre Gyrotourbillon, which they offer in several of their high-end watches. I tried to make the model an accurate (scaled up) version of the original mechanism, which is less that 10mm in…
this is the latest of my gyro rings remix pack, to view the complete collection click the link below, https://www.printables.com/@MSBstudios_2395520/collections/2557591 as the rest of the rings this is a simple print: 15% infill is…
Summary: This is a gaming themed modular drink and snack holder. It is perfect for keeping your drink from spilling while on an uneven/level surface, such as a couch, chair, or bed. It includes a storage compartment perfect for holding…
Gyroid LED Lamp Print instructions Print Body and Cap with just 3 bottom layers and gyroid infill. Glue everything together, except "Body". Base have cut out for simple LED cotroller, like this:…
An elegant and original spiral fidget spinner 3D printed for stress relief! This innovative toy features a spiral structure that spins smoothly around its axis. Perfect for relaxation, focus, and keeping your hands busy, it’s ideal for…
The only thing I did differently is use m4 x 20mm bolts and some m4 x 30mm bolts. Also I used nyloc nuts. Everything prints fine without supports.
Another fidget to add to the collection, the gyro fidgets. I wanted to start exploring different ways to fidget with the simple gyro concept, which resulted in a few different simple variations. The plan is for these base models to turn…
Symmetrical design. Use print supports.
Not a new idea, but this one is customizable using OpenSCAD. You can choose gimbal pivots, size, number of rings etc. Customizing: Download, install and run OpenSCAD, it's completely free (open source; Win/Linux/Mac), load the scad file,…
This is a remix of John_Wet's gyroid which is a remix of jcohen313's gyroid which is a remix of westomopresto's groid on thingiverse. I wanted to print this rally big and thought the large trim at the top looked off to me and would also…
Nice little print in place (PIP) keychain fidget toy for all VOLKSWAGEN fans. There are different versions available with different gap widths between the rings. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%
This print takes about 20 min on my printer and is a lot of fun!!Also handy t
