Gyroid Pen Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.13 – €5.05 net (excluding VAT)
For file: gyroid_pen_holder_0.2mm_PLA_MK3S_5h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.59 excluding VAT (range midpoint).
- Weight reported by the author
- 45 g
- Print time reported by the author
- 5.19 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Created in PrusaSlicer with modifier meshes, read this tutorial to learn more: https://blog.prusaprinters.org/model-…
- Rating
- 4.923 / 5
- Likes
- 488
- Downloads
- 3,796
- Makes
- 39
- Views
- 19,832
- Reviews
- 39
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
Created in PrusaSlicer with modifier meshes, read this tutorial to learn more:
https://blog.prusaprinters.org/model-with-prusaslicer-modifier-meshes-tutorial
If you slice this yourself, make sure that the infill anchoring is set to 0.
I've updated both the G-code and the 3MF to have this already set-up. This way, all 4 sides will look the same and pretty.
The old version had 2 nice sides and two that didn't look quite as well.
I've also changed the 3MF and use a height-range modifier instead of a modifier mesh. The result is the same, but it makes more sense this way and is easier to modify.
Printed from Prusament Mystic Brown and Prusament PLA Oh My Gold.
I think it could also look really nice with a color change right where the visible infill begins, if you try to print it that way, I would love to see a picture of it :)