Heart Gyro Fidget | Valentine's Day Special
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A print-in-place gyroscopic fidget toy with a spinning heart center. No assembly required. Perfect Valentine's gift.
- Rating
- 4.857 / 5
- Likes
- 257
- Downloads
- 1,734
- Makes
- 9
- Views
- 3,049
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
BOM: Printed with ROSA3D High Speed PLA Pink
Looking for a unique, small gift for Valentine's Day? This gyroscopic fidget toy features multiple concentric rings that rotate independently around a central heart.
It is designed as a Print-in-Place model, meaning the hinges are printed already assembled. Just take it off the build plate, give it a little wiggle to break the friction, and start spinning!
Key Features:
Fully Articulated: Rings spin freely in all directions.
No Assembly: Prints as a single piece.
Flat Printing: Easy to print, no supports needed.
Printing Instructions:
Supports: NONE (Do not use supports, or the rings will fuse together).
Material: PLA works best for smooth movement.
Layer Height: 0.2mm recommended.
Clearance: The tolerances are optimized for standard 0.4mm nozzles. If your rings stick, try reducing "Flow" slightly or checking your horizontal expansion settings.