1 / 6
Heart Gyro Fidget | Valentine's Day Special — zdjęcie 1
1 / 6

Heart Gyro Fidget | Valentine's Day Special

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A print-in-place gyroscopic fidget toy with a spinning heart center. No assembly required. Perfect Valentine's gift.

Ocena
4,857 / 5
Polubienia
257
Pobrania
1727
Wydruki
9
Wyświetlenia
3037
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

BOM: Printed with ROSA3D High Speed PLA Pink

Looking for a unique, small gift for Valentine's Day? This gyroscopic fidget toy features multiple concentric rings that rotate independently around a central heart.

It is designed as a Print-in-Place model, meaning the hinges are printed already assembled. Just take it off the build plate, give it a little wiggle to break the friction, and start spinning!

Key Features:

  • Fully Articulated: Rings spin freely in all directions.

  • No Assembly: Prints as a single piece.

  • Flat Printing: Easy to print, no supports needed.

Printing Instructions:

  • Supports: NONE (Do not use supports, or the rings will fuse together).

  • Material: PLA works best for smooth movement.

  • Layer Height: 0.2mm recommended.

  • Clearance: The tolerances are optimized for standard 0.4mm nozzles. If your rings stick, try reducing "Flow" slightly or checking your horizontal expansion settings.

Tagi