La Pavoni Mignon/Europiccola/Professional boiler cap - shalf remake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is remix of La Pavoni Mignon/Europiccola/Professional boiler cap shalf with 5mm bold to hold the brass boiler cap
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
The shalf is a remake of the La Pavoni Mignon/Europiccola/Professional boiler cap.
It covers the shalf only, please use the handles from original model designed by @SveinHa
The shalf is without the holes on the bottom and instead has the small bolds to hold the shalf in position.
This prevents shalf turning without boiler cap staying in the same position.
It requires drilling the holes into the brass bolier cap from coffee sensor. Use 4mm or 4.5 mm drill and go as long as 6 mm deep.
Use La Pavoni boiler cap shaft hole alignement tool to drill the holes to the right place.
Tested with Prusament PC Blend at 100% infill.