Liczymy pasujące modele…
A remix of the 54 mm Umikot for the 51 mm post-millenium La Pavoni filterholder. See the 54 mm version for instructions. The basketdepths are: Standard double: 26 mm IMS 14-16gr: 25 mm (not tested yet!) IMS 16-20gr: 29 mm (not tested…
I created this spoon to always have the perfect amount of ground coffee in my espresso maker. Print it in PETG to have a food and dishwasher safe coffee spoon. Print Settings Printer Brand: RepRap Printer: Mendel90 Rafts: No Supports: No…
A self leveling tamping station designed for the 49mm basket of a pre-millenium (generation 2) La Pavoni Lever Espresso machine. The basket sits flat in the base and the funnel screws on top. The funnel was designed with a straight…
The tolerances should allow it to be used with needles that have the metal or the rubber handle. With needles that have a <20mm handle and a needle length of 40mm (without the handle) there is no need to cut the needles. The files contain…
Print with at least 4 perimeters. Not a lot of infill required (~10%). PLA worked fine for me. Increase printing temperature by 5-10°C for good layer adhesion. Category: Hand Tools
A custom tool designed to remove the boiler flange nut/ring on La Pavoni machines (part no. 31104702). Perfect for safe and easy disassembly without damaging components. Printed in PETG (0.4 mm nozzle, 0.3 mm layer height, 5 wall loops,…
This dosing funnel attaches perfecty to my original portafilter from La Pavoni, doesn't fall when upside down, I can hear the click when attaches to the portafilter, very well adjusted for my printer/filament. I was considering to add…
Using same needles and same countersunk bolts. Trim needle handle to 7mm and add 20 and 30mm for the actual needle. No mods beside needle positions to make them work when scaled. Will work with standard 49mm Pre Mil La Pavoni and IMS…
Printing This model consists of five seperate parts, each indicated by the leading number of the stl file. For parts 1 & 4 there are two version available, so pick one. All parts printed with 0.20 mm layer hight. Part 1 - Handle Print as…
While official 3rd generation Pavoni Europiccola drip trays fit older models, they are too wide and wobble. User drgary from Home Barista forums designed a drip tray for 1st gen La Pavoni machines, but I found it to be too small, and left…
Link to new conversion nut that works with the new heaters on older machines. https://www.espressocare.com/products/item/la-pavoni-heating-element-flange-pre82 The removal tool requires m3 bolts to be slid into the holes on the tool and…
A simple funnel for 49mm baskets that are used by the Olympia Cremina or older La Pavoni models. The funnel sits well on my 14g baskets without the need for magnets. It allows for WDT and tamping for minimal mess in the kitchen :) Printed…
Specifically this is the portafilter that the model is designed to work with, although I do have a custom wood portafilter handle that may be a slightly different diameter from the stock handle. My handle sits flush with the counter when…
Tamperstation für La Pavoni Europiccola zur besseren Vorbereitung und Tampern.
Little lever adapter for the La Pavoni Europiccola espresso machine that slips over the existing steam knob. Idea was to not have to fully remove the C clip to replace with a different knob/lever and just slip it over the top of the…
This is a tool to assist with reinstalling the pistion back into the group head on La Pavoni espresso machines such as the Europiccola and the Professionale. It is designed to work with Millenium models (post 2000) not legacy models.
Tamper station for post millennium LaPavoni portafilters. There are three versions avaliable: Standard - Pictured (Height 65mm): The basket is slightly protruding above the upper surface Flat (Height 60mm): The lugs sit flat on the rim of…
My scale has always slipped on the drain grid and I wanted to avoid touching the hot boiler. Therefore, I designed the drip grid, which holds the scale in its position. Accordingly, uses filament which the temperatures can well withstand.
Ein passender Tamper für die La Pavoni Europiccola und andere Maschinen ab 2005 mit passendem Durchmesser 51,5 mm. Gedruckt in ABS, sollte aber mit jedem Material funktionieren, außer natürlich TPU.
You will be surprised at how stubborn of a grouphead sleeve this will be able to remove. (some WD40 left to sit for an hour also never hurt anything) I printed on Prusament PLA with 4 perimeters, and increased temps from 230 to 235 C for…
Tool for removing or installing the piston sleeve in a LaPavoni lever coffee machine (millenium version). Includes a hole for screwdriver/hex key for additional torque. Print settings: Printed in PETG 0.20 mm layer heigth (0.20 mm…
Funnel for newer LaPavoni Europiccola models. Fits on 52mm inside / 59mm outside portafilter The Tamper can be used with the Funnel No support needed printed with 15% infill and layer height 0.15
Very simple tamper base station for the 49mm & 51mm naked-portafilter for Olympia Cremina and La Pavoni. It has just enough height to clear the portafilter handle from the ground and keeps it level even when not filled. Now parametric…
Trichter für ein Sieb der post millenium Brühgruppe mit 52 mm. Der Trichter liegt über der Wölbung auf. Category: Household
If you like me have a Eureka Mignon single dose grinder and a La Pavoni coffee machine, you'll know that the metal doser is too big for the post-millenium 51mm portafilter. The doser adapter has been tested and works flawlessly, the…
New base for the portafilter from naked-portafilter.com for the 49mm La Pavoni or Olympia Cremina. I use it with the 14g precision basket with 22mm depth. I needed to cut the needles to a total of 40/50mm. Printed with PETG on Bambulab A1…
Printed in PLA. I used an 18X5mm magnet for my print. Weighs about 93.2 grams empty so the magnet functionality should still work. .2 or .28 layer height with 10% infill should work. Use tree supports for the bottom magnet hole. If you…
To complete this build you need a brass boiler cap base which you can get from several places. I bought mine here: https://coffee-sensor.com/product/la-pavoni-lever-boiler-cap-base-in-brass/ The shaft need to be made in PC (polycarbonat)…
Handle (Porta filter or Lever) for La Pavoni lever coffee machine - or any coffee machine that uses M12 female thread actually. I printed in PACF and it works well. Just something a little different and a little bit shorter than the…
I wanted a way to make my workflow cleaner so here it is. You'll want to print the filter basket side facing down with tree supports. A 10x3 mm magnet is needed for the base. I printed mine in PLA and it's working well. If you like this…
I made this for my friend so its easier to remove the boiler cap. I unfortunatly dont have any photos
Anothere LaPavoni tamping station for premilenium portafilters (49mm). I needed to fit in little longer due to single spout setup which goes deaper than oridinal double spout from La Pavoni. Printed in ABS with 15% gyroids infill, works…
The shalf is a remake of the La Pavoni Mignon/Europiccola/Professional boiler cap. It covers the shalf only, please use the handles from original model designed by @SveinHa The shalf is without the holes on the bottom and instead has the…
Printed off gigi's version of the funnel and had issues with the bottom breaking sometimes because of how thin the bottom section is. I am learning Fusion and thought, I can make that and make it thicker so it will be more robust. Printed…
Cache de protection des LED Cafetière PAVONI. Impression: PLA Transparent / PETG Transparent Remplissage 20% en gyroïde 0.10mm Détail Support organique sur le plateau uniquement 4 bordures Plateau lisse ou texturé
This is a magnetic portafilter holder for the Option-O LAGOM Casa grinder, designed specifically for La Pavoni Professional and Europiccola bottomless portafilters (Post-Millennium). The magnet is embedded directly into the part during…
To complete this build you need a brass boiler cap base which you can get from several places. I bought mine here: https://coffee-sensor.com/product/la-pavoni-lever-boiler-cap-base-in-brass/ The shaft need to be made in PC (polycarbonat)…
Tamperstation für La Pavoni Europiccola zur besseren Vorbereitung und Tampern.
This thing replaces the front plate on a La Pavoni Jolly grinder to allow for directly collecting the grinds in a filter. It is in three parts, which might have to be modified individually. For example, the filter holder has a hole…
Objective I always wanted to know the grouphead temperature of my LaPavoni lever machine in order to remove the related guesswork and thus getting more consistent results. Unfortunatly all available solutions failed to match the general…
This is for a 49mm portafilter off of a Pre-Millenium La Pavoni Europiccola. I hung it to the wall with some double-sided tape or command strips. Simple and effective.
The Pavoni Funnel works only for my 18g basket. The shallower one didn't fit for some reason. I bought this portafilter: rebrand.ly/Portafilter
This thing replaces the front plate on a La Pavoni Jolly grinder to allow for directly collecting the grinds in a filter. It is in three parts, which might have to be modified individually. For example, the filter holder has a hole…
I modeled the original wooden handles that come on my 2015 La Pavoni Professional Copper and Brass Espresso Machine These were modeled with the intention of fabricating them in wood on a milling machine, but since I had the models, I…
A small funnel for the la Pavoni coffee grinder, this makes it easy to use different small amounts of coffee beans. Prints without supports, place on ‘top’ face.
Replacement tray for a 1997 La Pavoni Bar S2. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 mm Infill: 15 Filament: Other PETG Black Category: Kitchen & Dining
Just made a longer (150 mm) handle of oryginal model. Printed with PEDG, 0,2mm.
Confirmed working. Update 05-11-2023 Confirmed working and slightly modified 29 mm version Update 31-10-2023 Added 22 mm base and corrected depths The Umikot adapted for the 49 mm pre-millenium La Pavoni baskets. It's the same size as the…
You'll want to use PETG for this print as PLA will warp over time. 15% infill seems to work fine.
