-ONE- Cable Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Introducing the -ONE- Cord winder, a simple and quick print for a one size fits all cord winder. Description: This…
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 353
- Wydruki
- 4
- Wyświetlenia
- 1794
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introducing the -ONE- Cord winder, a simple and quick print for a one size fits all cord winder.
Description:
This design introduces two winding sides to accommodate any cable lengths and sizes, be it a 1m long cable or a short cable. Clips are implemented to help not only with the tidiness but also adds in a useful functionality for frequent users. Multiple clips allows to the user to wrap up the cord to a predefined length as needed to allow quick unwinding knowing that the length will always be the same.
Features:
- Simple & quick
- One size fits all
- Clipping points
User Adjustments:
- Scale up z-axis to increase thickness to improve strength
- Scale x or y axis if required to fit larger cords or smaller for compactness
Print Settings
Printer:
Artillery Sidewinder x1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm layer height
Infill:
Negligible
Filament:
3D Aura PLA
White How I Designed This ===================
Inspired by the various cord winders available to buy or print but tweaked to be able to handle various situation as a one size fits all design, this lead to design two winding sides.
Most non-mechanical winders don't have a way to lock a specific length of cable which is commonly used by the user (e.g. VR headset's cord usually is too long and has a 'fixed' slack). As such clips are added to help set predetermined lengths for quick unwinds knowing that the length will always be what is needed.
Category: Organization