Creality Ender 3v3 KE (SE)

Used community 3d model of 3v3 KE to add some of my own mods and some other popular mods like @NeedItMakeIt Z support and linear rails u can upload whole model in Fusion and then export what u need to print.

2.1.2026. Added more stuff

27.12.2025. Fixed some mistakes and added few extra parts.

If u plan to print EXTRUDER visualizer remove included SUPPORT  block gap is too small better use slicer supports and print it with A faceing up for manual color change add pause at layer 90 ( 0.1 layer , 4 walls 5 tops 5 bottoms )

If u plan to use toolhead SENSOR relocation u will need PC4 M6x1 connector and when u install it in PIVOT use only few threads not all of them to have more PIVOT angle.

( ON THE TOP THERE IS A PTFE GUIDE WITH PIVOT U CAN PRINT ARM IN 2 PARTS AND ASSEMLE IT WITH M3x10 SCREWS )

If u plan to print Z HOLDER its remixed ( https://www.printables.com/model/782801-ender-3-v3-ke-se-renfort-de-blocage-tige-axe-z ) to be used with NeedItMakeIt Z Brace and u will need 2x 3.5x16 standard wood screws and 3mm drill bit to install it and then u need  bring stock lock pulley from bottom of lead screw up to ur bracket and put some lube there i just drilled 5mm hole on side of brace holder so i can sneak allen key in and remove locking screws to bring pulley up!

X MOTOR COVER  still needs some work to be used with z brace and cable spine chain and to keep 240mm on Z axis