Creality Ender 3v3 KE (SE)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Whole model with personal and community mods (2.1.2026. Added few more things) ( 27.12.2025. Fixed some issues )
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 314
- Makes
- 0
- Views
- 2,722
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Used community 3d model of 3v3 KE to add some of my own mods and some other popular mods like @NeedItMakeIt Z support and linear rails u can upload whole model in Fusion and then export what u need to print.
2.1.2026. Added more stuff
27.12.2025. Fixed some mistakes and added few extra parts.
If u plan to print EXTRUDER visualizer remove included SUPPORT block gap is too small better use slicer supports and print it with A faceing up for manual color change add pause at layer 90 ( 0.1 layer , 4 walls 5 tops 5 bottoms )
If u plan to use toolhead SENSOR relocation u will need PC4 M6x1 connector and when u install it in PIVOT use only few threads not all of them to have more PIVOT angle.
( ON THE TOP THERE IS A PTFE GUIDE WITH PIVOT U CAN PRINT ARM IN 2 PARTS AND ASSEMLE IT WITH M3x10 SCREWS )
If u plan to print Z HOLDER its remixed ( https://www.printables.com/model/782801-ender-3-v3-ke-se-renfort-de-blocage-tige-axe-z ) to be used with NeedItMakeIt Z Brace and u will need 2x 3.5x16 standard wood screws and 3mm drill bit to install it and then u need bring stock lock pulley from bottom of lead screw up to ur bracket and put some lube there i just drilled 5mm hole on side of brace holder so i can sneak allen key in and remove locking screws to bring pulley up!
X MOTOR COVER still needs some work to be used with z brace and cable spine chain and to keep 240mm on Z axis