1 / 6
Baofeng GT5-TP volume knob — zdjęcie 1
1 / 6

Baofeng GT5-TP volume knob

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I don't like the huge and ugly original volume knob. So I drew one by taking a look at the UV-9R Plus one.

Ocena
0 / 5
Polubienia
1
Pobrania
92
Wydruki
0
Wyświetlenia
667
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I don't like the huge and ugly original volume knob. So I drew one by taking a look at the UV-9R Plus one. It also features a reference notch.
To be printed with flex or semiflex filament, tipically TPU it's a good choice.
You can choose to print and keep 1mm of brim which will act as a lip seal.

I also included the step file for any changes to the internal diameter in accordance with the output of your 3D printer.

[EDIT 10/24/2019]
GT-5TP_vol_knob_V7.stl added.
Due to a probable plunger effect that can spontaneously extract the knob after some time from the installation, I have designed a way out for the air that is compressed during insertion.

Print instructions

Printer: L200

Rafts: No

Supports: No

Resolution: 0.08mm

Infill: full or use 4 perimeters

Filament: ZCORY PBT Flex black

Tagi