Baofeng GT5-TP volume knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I don't like the huge and ugly original volume knob. So I drew one by taking a look at the UV-9R Plus one.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 92
- Makes
- 0
- Views
- 667
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't like the huge and ugly original volume knob. So I drew one by taking a look at the UV-9R Plus one. It also features a reference notch.
To be printed with flex or semiflex filament, tipically TPU it's a good choice.
You can choose to print and keep 1mm of brim which will act as a lip seal.
I also included the step file for any changes to the internal diameter in accordance with the output of your 3D printer.
[EDIT 10/24/2019]
GT-5TP_vol_knob_V7.stl added.
Due to a probable plunger effect that can spontaneously extract the knob after some time from the installation, I have designed a way out for the air that is compressed during insertion.
Print instructions
Printer: L200
Rafts: No
Supports: No
Resolution: 0.08mm
Infill: full or use 4 perimeters
Filament: ZCORY PBT Flex black