Tablet Holder with Shelf for Stylus - Cable Routing, No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact tablet holder with stylus shelf. Now updated with improved stability and multiple slot sizes!
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 643
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
A minimalist tablet stand with an integrated shelf to put your stylus. It is designed for everyday desk use and media viewing. The angled design provides good stability while keeping a clean and simple look.
The model is optimized for easy printing without supports and works well with common materials like PLA or PETG.
Recommended print settings:
Layer height: 0.2 mm
Infill: 15-20%
Walls/Perimeters: 4-5
Outer wall speed: 30-40mm/s recommended for best surface finish
Supports: Not needed
Material: PLA or PETG
Slower outer wall speeds are recommended to achieve a cleaner surface finish on visble faces.
Update (V1.1):
This update introduces several functional improvements:
Deeper stylus shelf to prevent the pen from sliding off.
Pass through for charger
Integrated cable channel underneath for cleaner cable routing.
Update (V2):
This update introduces further functional improvements focused on stability and fit:
Reduced overall height from 30mm to 25mm to improve stability
Tablet slot moved slightly forward to reduce the risk of tipping
Multiple slot size options: 6mm, 8mm, 10mm and 12mm
All slot sizes include a +0.2mm tolerance for improved fit across different printers and materials
The original version (7mm slot, 30mm height) remains included.
This model remains support-free and easy to print. I also recommend adhesive rubber feet for added grip.
Feedback and suggestions are welcome!
Check this out if you want a slim tablet holder without the stylus shelf: