Case for a CEC blocker adapter for the Mister FPGA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for an HDMI adapter that can be used to block CEC signal from the Mister FPGA
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
The Mister FPGA has some problems with CEC, in which if you connect the Mister to your TV, it will mess up the connection to any soundbar or receiver that is also connected to it. There's 3 ways to avoid this:
Buying a HDMI cable without the pin number 13, which is very hard to find depending of where the person lives
Removing/covering the pin 13 from a normal HDMI cable, which is very hard to do
Buying an adapter like the one below and scratching the trace for the 13rd pin with a paper cutter, like this:

I made a case for this adapter so the PCB doesn't get exposed to dust and oxidation. It uses 4 M2 6mm screws. The position of the 4 holes on my adapter are very inconsistent, so I hope the holes on the case align with at least 2 holes for the majority of the adapters out there.
I also made a longer version for the Mister FPGA from Retrocastle, so the adapter doesn't keep hanging from the HDMI connector. The longer version files are "HDMI anti CEC Retrocastle Top.stl" and "HDMI anti CEC Retrocastle Bottom.stl"
The adapter can be bought on Aliexpress by searching for "HDMI male / female test board", this link goes to a page from one of the sellers https://a.aliexpress.com/_mKE4Bnr
As always, the .f3d files are available in case anyone wants to make any modiffications :)