1 / 1
Spool filament storage rack for 3/4" EMT (Metal Conduit)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix for the spool filament storage rack to fit 3/4" Electric Metallic Tube (EMT).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Simple spool/filament storage rack brackets for a shelf. Remixed to use 3/4" EMT instead of the original which used 3/4" rods. Also added screw holes in case you need to attach it to shelves more securely.
Print settings are not critical. I've printed mine using PETG but PLA should be totally OK. Print at 0.28 layer thickness for faster prints. No supports needed.
