1 / 5
Wurrkos HD02 Magnetic Head Clip 20x6x4 — zdjęcie 1
1 / 5

Wurrkos HD02 Magnetic Head Clip 20x6x4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic head clip for the Wurkkos HD02 for 2x 20x6x4 magnets (stacked)

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

The Wurkkos HD02 is one of my favorite lights of 2025 but one thing that I miss is the ability to twist the wings to illuminate away from a magnetic surface. With this clip the lamp can be magnetically attached overhead so that the sidelights are oriented down. This clip snaps on to the head of the HD02 and has an opening for 2x 20x6x2 stacked magnets. The tolerances on my Core One are tight enough that it takes quite a lot of pressure to insert the magnets, no glue required. Depending on your printer and/or settings you may have to use glue or adjust the design. The 2 magnets are strong enough to hold the lamp overhead but the lamp will slide if mounted sideways, in case you need sideways mounting see below:

If you would like to use other magnets, feel free to use the 2nd file (Wurkkos HD02 Head Clip No Magnet) and add a negative volume appropriate for the size of you magnet(s). The plate holding the magnets is 5mm thick and I would not set my magnets deeper than 4-4.5mm.

The material is used is Prusament PETG Prusa Orange. Best orientation is as seen in the gallery. Supports are only required for the magnet slot.

Slicer Settings:

  • Infill:

    • Fill Pattern Gyroid

    • Top fill pattern: Concentric

    • Bottom fill pattern: Concentric

  • Supports: Everywhere

  • Support Material:

    • Auto generated supports: On

    • Style: Snug

Please share your makes and remixes!

Tagi