1 / 5
Tesla Cupholder adapter for Yeti 36oz Rambler Water bottle — zdjęcie 1
1 / 5

Tesla Cupholder adapter for Yeti 36oz Rambler Water bottle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter insert to securely hold a large 36oz water bottle (96mm diameter).

Ocena
0 / 5
Polubienia
12
Pobrania
44
Wydruki
1
Wyświetlenia
279
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This is an adapter for the cupholder on a Tesla Model 3 to securely hold a 36oz Yeti Rambler water bottle. This adapter is designed to work with readily available silicone cupholder liners, and uses the three protrusions for a solid friction fit. Confirmed working on a 2022 Tesla Model 3.

How to use
  • Push and twist to lock the adapter in place.

  • To remove:

    • Rotate adapter 1/6 turn to align adapter slots with nubs on the cupholder liner

    • Lift out of cupholder

Printing
  • No supports needed

  • Print in provided orientation. Bottom on the plate, large opening facing up.

  • PETG recommended for heat resistance. PLA may work in colder climates.

Sample Print info:
  • Printer: Prusa Core One (Firmware v6.3.4+10511)

  • Nozzle: 0.4mm

  • Filament: Polymaker PETG Blue

  • Slicer Settings:

    • PrusaSlicer 2.94

    • 0.20mm Balanced profile

    • with 10% infill

    • Used ~95g filament in 2 hrs 46 min

Tagi