1 / 3
Grocery Bags Carrier - REVISED - see note 1 — zdjęcie 1
1 / 3

Grocery Bags Carrier - REVISED - see note 1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A handy tool for helping to carry your groceries at up to eight bags per hand.

Ocena
0 / 5
Polubienia
9
Pobrania
16
Wydruki
0
Wyświetlenia
173
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Firstly, the load carrying capacity of tthe tool is rated at just 3kg per device/hand (or 4 bottles of OJ total - two per hand). Print the base flat side down - supports not required. While I printed both the base and four hooks in enhanced PLA stronger filaments like ABS or ASA would of course be preferable.

You will need the following hd'we: four each M5x50 flat or socket head screws; four each M5 self-locking nuts (tall style);  eight each M5 washers (non-locking).

Disclaimer - I wouldn't trust carrying anything especially valuable, fragile or heavy in the usual super thin plastic bags common in the States, with or without benefit of this device.

NOTE 1: Added Rev. 03 of the ToteBase STEP file to eliminate handle pattern near the 6:00 O'Clock position to improve printability.

Tagi