Grocery Bags Carrier - REVISED - see note 1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handy tool for helping to carry your groceries at up to eight bags per hand.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 16
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Firstly, the load carrying capacity of tthe tool is rated at just 3kg per device/hand (or 4 bottles of OJ total - two per hand). Print the base flat side down - supports not required. While I printed both the base and four hooks in enhanced PLA stronger filaments like ABS or ASA would of course be preferable.
You will need the following hd'we: four each M5x50 flat or socket head screws; four each M5 self-locking nuts (tall style); eight each M5 washers (non-locking).
Disclaimer - I wouldn't trust carrying anything especially valuable, fragile or heavy in the usual super thin plastic bags common in the States, with or without benefit of this device.
NOTE 1: Added Rev. 03 of the ToteBase STEP file to eliminate handle pattern near the 6:00 O'Clock position to improve printability.