1 / 4
Lamp Cover for Daihatsu Terios (2007-2017) – 3D Printed Replacement Part — zdjęcie 1
1 / 4

Lamp Cover for Daihatsu Terios (2007-2017) – 3D Printed Replacement Part

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D-printed replacement lamp cover for Daihatsu Terios models from 2007 to 2017. Designed as an alternative for an origin

Ocena
0 / 5
Polubienia
4
Pobrania
34
Wydruki
0
Wyświetlenia
197
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This 3D-printed lamp cover for the Daihatsu Terios (model years 2007–2017) was created to replace an original part that is no longer available from the manufacturer.

I printed it from ASA for durability and UV resistants. Because of its shape it needs to be printed flat with a lot of support. For asthetiks, i recommend putting the backside to the printplate.

100% infill and 5-8 Walls for stability.

For Assembly:

You need an additonal screw and on the other side a pin. IN my case i used an stainless steel screw with a non threaded shaft and cut it to size to scew it in the part.