Lamp Cover for Daihatsu Terios (2007-2017) – 3D Printed Replacement Part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printed replacement lamp cover for Daihatsu Terios models from 2007 to 2017. Designed as an alternative for an origin
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This 3D-printed lamp cover for the Daihatsu Terios (model years 2007–2017) was created to replace an original part that is no longer available from the manufacturer.
I printed it from ASA for durability and UV resistants. Because of its shape it needs to be printed flat with a lot of support. For asthetiks, i recommend putting the backside to the printplate.
100% infill and 5-8 Walls for stability.
For Assembly:
You need an additonal screw and on the other side a pin. IN my case i used an stainless steel screw with a non threaded shaft and cut it to size to scew it in the part.