1 / 4
Hidden Screw, Print in Place Wall hook — zdjęcie 1
1 / 4

Hidden Screw, Print in Place Wall hook

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This hook was not only designed to look good but provide its own support without wasted material.

Ocena
5 / 5
Polubienia
97
Pobrania
500
Wydruki
2
Wyświetlenia
2803
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Public Domain

The hidden screw wall mount mechanism is an elegant solution to a simple problem. I wanted to design a wall hook that could match most modern decor within the home. because I hate wasting support material the dovetail part supports the main body during printing to make a hassle free print and no wasted plastic :) also since they print together they form a precise and flush surface on the back when mounted.

recommendations:

(No supports needed)

For strength I would recommend printing at above 15% infill, even at 5% in PLA+ it was quite strong but safety factor is always good.

For layer thickness I would not recommend going larger than 0.03mm layer height the overhang at the end of the hook will suffer at larger layers.

A standard No. 6 wood screw should fit well in the countersink it can also accommodate slightly larger screws depending on type but I do recommend a tapered countersink style screw.

I included a small divot on the back of the hook to provide a spot to leverage when breaking the pieces free from each other.

Tagi