1 / 4
Hidden Screw, Print in Place Wall hook — image 1
1 / 4

Hidden Screw, Print in Place Wall hook

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This hook was not only designed to look good but provide its own support without wasted material.

Rating
5 / 5
Likes
97
Downloads
500
Makes
2
Views
2,803
Reviews
2

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Public Domain

The hidden screw wall mount mechanism is an elegant solution to a simple problem. I wanted to design a wall hook that could match most modern decor within the home. because I hate wasting support material the dovetail part supports the main body during printing to make a hassle free print and no wasted plastic :) also since they print together they form a precise and flush surface on the back when mounted.

recommendations:

(No supports needed)

For strength I would recommend printing at above 15% infill, even at 5% in PLA+ it was quite strong but safety factor is always good.

For layer thickness I would not recommend going larger than 0.03mm layer height the overhang at the end of the hook will suffer at larger layers.

A standard No. 6 wood screw should fit well in the countersink it can also accommodate slightly larger screws depending on type but I do recommend a tapered countersink style screw.

I included a small divot on the back of the hook to provide a spot to leverage when breaking the pieces free from each other.

Tags