ALEPOD Solar Pathway Light Stake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement stake for solar path lights
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement stake for these ALEPOD solar pathway lights. Requires supports. I recommending printing in ASA.
If you like this model and would like to give back, please consider buying me a coffee.
EDIT:
5/8/26 - The original version (and basically every other stake model I could find) prints standing up and was prone to breaking off along the layer lines. I designed a new version from scratch that prints laying flat and requires no supports. Two versions attached, one with a 24.8mm inner diameter (ID) hole, one with a 25.0mm ID. F360 file also added in case anyone needs to adjust the tolerances. (note that changing anything other than the circle_diameter may break the model). Changed to a non-commercial license due to the F360 file.