ALEPOD Solar Pathway Light Stake
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement stake for solar path lights
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 19
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement stake for these ALEPOD solar pathway lights. Requires supports. I recommending printing in ASA.
If you like this model and would like to give back, please consider buying me a coffee.
EDIT:
5/8/26 - The original version (and basically every other stake model I could find) prints standing up and was prone to breaking off along the layer lines. I designed a new version from scratch that prints laying flat and requires no supports. Two versions attached, one with a 24.8mm inner diameter (ID) hole, one with a 25.0mm ID. F360 file also added in case anyone needs to adjust the tolerances. (note that changing anything other than the circle_diameter may break the model). Changed to a non-commercial license due to the F360 file.