Boba Wall Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall hook in bubble tea form. Comes in two sizes, small and large!
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 36
- Wydruki
- 2
- Wyświetlenia
- 781
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
A wall hook in the shape of bubble tea! You can hang your keys on the boba, or attach your keychain to the straw! Comes in Small and Large sizes, and I have multiple straw options available. You can even design your own!
Printing
A layer height of 0.20mm works for all components. I did NOT print this with supports. In fact, I printed the prototype with supports and they were kind of annoying to remove off of the boba hooks.
Assembly
Whether you print a Small or Large bubble tea, you have 3 parts:
x1 Base
x1 Tea Plate
x1 Straw
To mount the Wall Hook, you need two of either M3 or M4 screws. I've never used wall mount screws for a print before, so I designed this print with some basic countersink screws in mind. If you need these holes adjusted just ask!
- Mount the Base to the wall at desired location.
- Press the Tea Plate in.
- Hang your keys! Or attach your keychain to the straw.
Custom Straw
I have included a few different straw options, but you can design your own using the following dimensions!
L = 76 mm
W = 12.4mm
H = 5.6 mm
This is with clearances in mind so you don't have to add them.
Fit
I have included multiple options for some parts (the tea plates) as you may want easy-to-remove plates. But if there is no worry of the hooks breaking, I can give you a more permanent tea plate.