Liczymy pasujące modele…
For whatever reason, the original was way too loose on my DIN rail, so I remixed it to fit way better, at least on mine!
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Features: Designed for Cherry MX compatible switches. LED Window to leverage the built-in RP2040 neopixel RGB LED. No screws! Mechanical peg holders for the RP2040. Snap cover. USB port access hole on the back of the macropad. 11 keys…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I have created an educational 3D-printable model to help children explore the function of semicircular arches, inspired by the hands-on learning approach of Montessori. Based on the Roman aqueducts, this model is my entry in this 3D…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
Piantor Custom Case Introduction This is a 3D-printable case for the Piantor keyboard from Beekeeb: https://shop.beekeeb.com/product/piantor-keyboard-kit/ Compared to the original case from Beekeeb, it has (among others) three main…
Wydruk około 3,09 €–3,77 € nettoWstępna wycena jednego wariantu
If you like this fidget toy, check out my improved 4-button Quad Toggle fidget ! PopKeys is a “toggle” fidget with a mechanical twist… Pressing any key will release any/all other keys. Pressing the key down far enough will lock it down…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
Build a 3D printed vintage synth inspired USB MIDI controller with custom GUI, an OLED, pots, knobs and key switches using CircuitPython and Adafruit KB2040! Full Tutorial https://learn.adafruit.com/midi-keyset KB2040…
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts.…
Edit: If you have some weird-***-shaped computer like @Emplar_201570 , this model might not fit. Apparently it's my responsibility to check that. Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as…
Works great with my other panels :)
This is a customizable keystone wall mount from https://thingiverse.com/thing:6647 Many thanks to https://www.thingiverse.com/jsadusk for providing it. Included STLs are for 1, 3 and 5 keystones for a tapered headed 3.5mm screw. Use the…
I wanted to print 4 of the Key variations but in a large quantity and fast with minimal post processing. I simply imported the models into the slicer, split them into their separate objects, scales accordingly so they merged well then…
Moved some parts from @marsf_1338819 and removed fillets to fit 1 more keystone Keystone are on the Right, but could make a Left version if requested. Should fit in any 10 inch rack that has at least 213mm inside spacing
Designed for use with the UCG-Fiber Rack Mount by @Mauker. This panel provides keystone jacks for the 1 x 10 Gb RJ45 WAN port (isolated on one side by the power supply bracket) and 4 keystone jacks for the 4 x 2.5 Gb RJ45 LAN ports on the…
EDIT Jun 2025: Updated models 9 Jun 2025. Improved the power cable cutout and increased the rigidity of the models in the mid section where they join and across the PSU holder. EDIT 2: Nov 2025. I am not able to do more mods on this. A…
You're a spy/locksmith/red teamer with only seconds of access to a key, this is the tool you need to make a near perfect reproduction and gain access to the controlled areas that key opens. This model includes two designs for molds that…
This is just the updated version of my golf simulator control box for GSPRO. This will eventually make it into production as my version 2 of my no program plug and play golf simulator control box. As always I make them available so people…
10 ports keystone patch-panel made to fit in 10-inch racks.
Designed to a minimal size for integrating into other prints. Excuse the bridging quality in my photos!! I printed in ABS and so printing in other materials might introduce slightly more tolerance, but still good fitment. I have used…
I wanted some translucent keys for WASD with the lettering cut out, to go along with my Escape and Any keys. These ones were printed using Overture PETG @0.2mm and I kept the printed texture so I can feel the slight difference when I put…
Added keystone mounts https://www.printables.com/model/537480-parametric-keystone-connector/files
This is designed to mount a Unifi Express Gateway to a 10in server rack. It doesn't need supports, though it will require bridging, and will be a fairly snug fit. After printing remove bridging on the back to make room for ethernet and…
This is a remix of a tool found on Thingiverse (https://www.thingiverse.com/thing:2775085) I added more support to stop the prongs from breaking on the first use. I have one that has opened about 200 switches that still works. Going, to…
So, if you are here, you know what it for ;-) Welcome! This design follows the original philosophy of being as compact as possible. You can even store unit with case in the original box (when not using mounting bolts). Anyway for proper…
This project is basically a laser engraver frame designed to work with leftover TAZ 3d printer pieces and whatever stuff I had laying around. It should be pretty easy to adapt to whatever size or bearing setup you would like to use. The…
https://mods.vorondesign.com/detail/FB646KO2cokFqN0D6vl0A – V0.2 Stealth Skirts by Maverick This is a remix adding two keystones to the rear of the sleek looking Stealth Skirts mod for the Voron v0. Easy access to USB, Ethernet, or HDMI…
It has 8 keystones isntead of brush holes
this is a wall mount for keystones i made to fit in some cable trunking its made so you can roughly cut out a part of the side and bottom of the cable trunking and have see no gaps when installed if printing with abs like , i would…
I took my trans cart key, and made it into a 6 colour pride flag styled version for all the pride! Printed using an MMU on my voron 2.4 in ABS+, and have handed out a few hundred to date with a lot of success. Make sure you get your layer…
English Versions: I needed a triangular standard key to be able to open a gas meter box and a garbage bin. I've found multiple triangular key designs but none of them specified any dimensions, so I made myself some different models so you…
Round visible face inspiration of the PopKey by Logitech
[UPDATE 15-12-2025] : I'm now unsure where I got the original 3-keystone model from... My initial remix is based on Mauker's design with an open front and 3-keystones, but I actually like Andreq's version with a closed front better. I've…
A customized patchpanel for 6 E-DAT keystone modules
🗝✨ Keys to the Kingdom – Key Prop Pack | 3gregious Designs Unlock your imagination with this trio of fantasy-inspired key props, each featuring a unique design that looks straight out of a storybook! Perfect for adventurers, collectors,…
Round keyboard 'Function Keys’ with recessed roman numeral markers designed for Cherry MX style key switches.
Used instruction on here to build a remote shutter button for android devices: https://vervainglobal.com/articles/remote-shutter.html The model is a housing for a keyswitch that you can hold comfortably in your hand a push with your…
a clicker made with inspiration from @third-dimension-labs
I designed this patch panel for the use in my 10" rack but decided to publish it. Well I only tested its compatibility with FGB CAT7 RJ45 Keystones but I am certain that it is compatible with almost every type of keystone! ;) Have fun…
I designed this model to be used at the back of my 10 inch mini rack. To unplug the rack for transport I just unplug the ethernet cable from the ethernet coupler mounted in the rear of the rack. You could use it in other ways as well. I…
Modular, two-part 32 ports keystone patch panel made to fit in 19-inch racks. Each module has 16 keystone jacks. this frees up one row compared to printing two sets of the original.
I wanted to move the keyswitch from up top to the negative space in the frame
A quick and dirty key holder specifically designed for the MX Keys keyboard. First, attach it to the edge near the space bar, and then pull it over the edge on the backside. I created this to hold down the F key in Palworld.
Print settings Should work on any ‘standard’ slicer settings, but just to share mine: 3 walls 4 top shell layers 3 bottom shell layers 10% cubic Matte PLA no supports Print orientation Print the model on its back (bumpy side facing up)
I am very happy with an app "HotKeyBind" which allows me to individually program function keys with my favourite actions. Here some examples: Shift+F1 adds a date to a filename. I store “2023-02-12 (1) ” in key F1, so a file is renamed to…
Slot for easy assembly of cables that are already attached to the connector
Just a simple solid keystone wallplate for RJ45 sockets, the one I use with this → CAT6 Shielded Keystone Dimensions: Print from whatever you like, I print mine from Matt White PETG, just print face down, no supports needed for anything.
I recently found a Commodore VIC-20 (Made in Canada 1984) at an Estate sale however the £ key was broken off. All the models I found were not for this keyboard revision so I modeled a replacement that worked and thought I would share it.…
Inspired by the Klack Ring, I decided to continue learning Blender and threw this little fella together. It's not perfect, it's not the best model around, but it prints a satisfying double keyswitch ring that fits around my thick fingers.…
A Keystone Module to fit audio jacks with ~6mm panel holes and hex nut mounting, as found here: https://www.amazon.com/dp/B01CVGD4UI or https://www.adafruit.com/product/3692 Nut is approximately 8mm diameter (flat-to-flat) and 1.6mm…
This is an print of mine for the kensington orbit trackball. The purpose was to have an extra row of buttons next to my fingers which i could apply common shortcuts to. To get the correct spacing between my finger and the row of keys i…
This keycap works just like the original ones. It does not contain a label and fits the function row as well as the other half size keys. Recommended print settings: no supports slightly flexible filament, so the tabs don't break off. I…
Description Wore your Keyboard Arrow Keys out yet? Asus ROG Keyboards are very expensive and I have found a way to give new life to my keyboard with broken arrow keys! I designed a snug fitting replacement arrow key set for my ASUS ROG…
Fit wallets up to 92mm and table up to 34mm thickness Main part screw thread is m10x1.5 and screw thread is m11
This model is meant to be printed with an FDM 3D printer using your material of choice (ABS RECOMMENDED
/////////////////////////////////////// ENGLISH /////////////////////////////////////// Most important keys for decorate geek room/office/desk. Easy print without supports. Contrast letters was painted by permanent fix.…
Due to the top mounted PCIe slot of heron's 10inch ITX Case V2 I ran into an interference issue with the original bracket. I cut away the upper lip to make the bracket close flush and thus allowing to mount another 10inch module over it.…
Die Abdeckung wird einfach auf einen beliebigen Nema 17 Schrittmotor, mit 33mm Gehäuselänge, aufgeschnappt. Zusätzlich lassen sich die Krallen mit einem Kabelbinder sichern. Für den elektrischen Anschluß ist eine Kombination aus…
I used a two-component epoxy adhesive for the joint.
Keystone Port Panel for Toyota Corolla Head Unit Replaces Toyota Corolla E120 2004-2008 | Part Number: 83910-02070 I recently replaced my stock head unit with a BOSS BE7ACP-FT and designed this panel to cleanly integrate the USB ports…
print using tpu, use the instance system in prusa slicer to make the exact amount you need included 3mf is set to 100 instances
Use this protective and comfortable double Keystone holder to punch down your ethernet wires. Side holes are helpful for hanging from a carabiner.
The KeySaver is the tactical solution for anyone who wants to store their keys or AirPods safely and be able to rescue them in emergency situations. Thanks to the use of high-quality TPU filament and a powerful magnet, this is the most…
🛠 XL Allen keys / Imbus holder for Lidl PARKSIDE pegboard (even more simplified version with 5 slots) This is a simplified, sleek remix of the Allen key holder, specifically redesigned for the Parkside/Lidl plastic pegboard system. ⚙…
This is a modular 3D printable rack-mount solution for an Intel NUC 7 , designed to integrate keystone jacks into a clean, professional front panel. It was originally made for a TecMojo 10" rack , but should be compatible with other…
I have a lot of keys and always struggle to find the house key. Now the key to the kingdom is easy to grab. Plus you get to feel like king Arthur pulling the sword from the stone. Designed to be snug on a standard sized house key. Print…
Deutsch: Es handelt sich hier um einen Schlüsselorganisierer im Schweizer Taschenmesser Stil. Ich war es leid, meine Schlüssel auf herkömmlichen Wege lose in der Tasche baumelnd zu tragen, da mir andere Modelle in dieser Form jedoch nicht…
This is a simple way to get some clutter off your countertop and keep track of those pesky pens and keys. The slicer view picture shows the print orientation. No supports required. I added a brim to the dovetail due to being tall and…
This magnetic keystone single jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S…
This magnetic keystone dual jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S Inserts:…
This lets you use a keystone jack in the hollow part of a spool to give you the ability to have one end buried but still usable. This lets you re-use spools, which can be helpful because PC can be harder to recycle.
There are no Keystone Mounts available for the Racknex UM-SBC-209 so i thought i design my own. Print Settings Printer Brand: Creality Printer: K1 **Supports:** Yes Resolution: 0,2 **Infill:** 100% Category: DIY
Contenitore x chiavi a brugola o pure cacciaviti lunghi con fori profondi 25mm stampato in PETG
Need a keystone panel for your rc2014? This has you covered. Quick print, requires no support materials. Compatible with the Bump-Out-Box: https://www.printables.com/model/1068569-bump-out-boxes-for-the-rc2014 Source code on Github:…
As seen on Tim DeBoer's gorgeous tool wall of fame . Tool holder for the hex keys from Runwell Japan. Runwell makes beautiful tools, and these hex keys are no different, but they're also high precision and really, really nice to work…
This is a Fun and convenient way to hold your keys. Depositing into the upside down magnetic bowl is satisfying. When your in a rush you can quickly grab them with ease. There 3 components of the Magnetic keys holder: The actual holder…
This is a modern design tray to place your keys, wallet, and chapstick when you get home. The wallet and key slots are the same size and the chapstick slot is designed to fit most any standard sized chapstick. Circular divots added on the…
A sturdy eyelet for your belt to pass trough. As seen in the pictures my belt loop keeps snagging on it when i remove my keys to use them, eventually tearing . ripping. i go trough a belt loop in about a month with the work i do. Ever…
This model should be able to hold any double or tri fold wallet, it should be able to hold most set of keys if you have more then 2-3 keys on the ring it wont fit. i have made the back slot be able to hold my work ID but it is the size of…
Piantor Custom Case Introduction This is a 3D-printable case for the Piantor keyboard from Beekeeb: https://shop.beekeeb.com/product/piantor-keyboard-kit/ Compared to the original case from Beekeeb, it has (among others) three main…
Wydruk około 3,09 €–3,77 € nettoWstępna wycena jednego wariantu
This model can be used to create a depth stop for old indoor keys to stop the key from overpenetrating the lock area. Print with a filament of your choice. Currently there is only the model KeyDepthStop_KeyWithFlatPortion , that can be…
HP Elite/Prodesk mini (G3/4/5, possibly later) 10" 1U rack mount with 2 keystone slots. 250mm wide faceplate.
Revised Left side model 20260215 - Inner screw holes did not line up as intended. There is also a remix that fixes this problem in a slightly different way. See Link Below:…
https://help.prusa3d.com/guide/8-mechanical-lock-add-on_360812 https://www.printables.com/model/284122-mechanical-lock-add-on-printable-parts We have two mostly identical Printers in our school, and both are in the Original Prusa…
E N G L I S H A housing for a standard Keystone module ( https://amzn.to/3LMuK5u ) to be able to install a LAN connection is a German sub-distribution, so that you can also still get to the LAN port. Right side is closed, left side is…
This is a 10" rackmount for keystones as well as separate accompanying panels for labelling said Keystones. The label strip can be placed above or below the Keystone panel. Required hardware: Screws and cage nuts that came with your…
Phone and Keys holder in a 2mm chamfered design. Holds two phones in portrait orientation and 6 keys. Prints without supports. V2 added 3 screw covers that can be engraved with your custom text facing the build plate.
New version of the model 1.1, optimized for easier printing. Game from first episode: keys and knives Support is needed. You can print individual parts and then glue the entire model. I will add photos of the finished product as soon as…
10" rack mount / shelf for Dell Optiplex Micro / MFF Series 5 with a hole for a keystone module. Models that should work: 3040, 5040, 7040, 3050, 5050, 7050, 3060, 5060, 7060, 3070, 5070, 7070. The rectancle on the rear right side is to…
12 keystone patch panel for 10" rack + test piece to test fit. Blank keystone module. Cable pass keystone moduly in 3 / 6 / 9 mm. SMA bulkhead keystone module. Toggle switch keystone module. I recommend printing the test piece first to…
Remix of Keystone Panel Mount by M Hole diameter is 3.4mm and the screwhead (widest part of the scew) 6.25mm.
Just a simple solid keystone wallplate for RJ45 sockets, the one I use with this → CAT6 Shielded Keystone Dimensions: Print from whatever you like, I print mine from Matt White PETG, just print face down, no supports needed for anything.
Due to the top mounted PCIe slot of heron's 10inch ITX Case V2 I ran into an interference issue with the original bracket. I cut away the upper lip to make the bracket close flush and thus allowing to mount another 10inch module over it.…
Please note that the WAGO logo may not be used. There are two important reasons for this: Trademark protection: The WAGO logo is a registered trademark and may not be used or modified without express permission. Quality promise: The WAGO…
A simple CARD wallet and key holder for a wall. Its capable of holding 3 sets of keys and 1 card wallet. The maximum wallet size of the original part is 16mm x 109mm. Parts You'll Need: 3 Hooks 2 command strips 16/10/2025 V1: Designed the…
A new 3D figurine generated by AI, The Three Wise Monkeys. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
I tried many keystone mounts but no one fitted my RJ45 keystone I had in my stock. So I designed my own. Features: Closed case Simple, sturdy and small Prints without support Strain relief with a small zip tie for keystones without…
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. Design Concept This playful design features a classic circus tent theme with a bold, fun…
![[RE-REMIX] 10-inch Rack Mount for UniFi UXG Max | UniFi UCG-Ultra | UniFi UCG-Max | 3 Keystones](https://media.printables.com/media/prints/adc6ccdc-6eff-4ddd-ac0f-4e95ccabe13a/images/9627747_37c38b0b-0449-4e4c-bd06-d9ab1999649f_1fc4f0c2-020e-40a5-b818-cb80370ed233/pxl_20250420_201749755.jpg)
![[RE-RE-REMIX] Unifi UCG-Max 10-inch rack mount w. 3 keystones](https://media.printables.com/media/prints/4e8e5b76-5358-4162-afff-d6768341d56b/images/11425369_783eb8fc-f79b-47e4-a416-92a39bf4af46_7eb03925-c93a-42cb-83a6-d824698c0cb9/img_4920.jpg)
