1 / 4
SFP+ Cable Keystone Jack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
A keystone jack to hide the hole in your patch panel if you're passing a SFP+ module (or other cable) through one of the keystone slots.
The center hole is 4.75mm in diameter, but there are .f3d and .step files available if you have a thicker cable or need a larger hole for another kind of cable.
Usage
- There is an overhang in the hook slot on the left and right printed parts. Clean up with a knife if required. This is not visible when installed, you just need the hook to fit.
- Pass the SFP+ module through the keystone hole of your patch panel
- Insert the printed hook in the left or right printed part
- Connect the left and right printed parts with the cable going through the slot in the middle
- Click the keystone jack into your patch panel
Printing Tips
- Do not rotate the parts
- No support required
- Use low infill to save plastic
- The sides are not visible, so use big layers to save time
- Try ironing for a smooth look on the visible surface