Lenovo Tiny 10 inch Rackmount with Keystone slots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For Lenovo M720 and similar models.
- Ocena
- 4,444 / 5
- Polubienia
- 120
- Pobrania
- 880
- Wydruki
- 8
- Wyświetlenia
- 9240
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit: If you have some weird-***-shaped computer like @Emplar_201570, this model might not fit. Apparently it's my responsibility to check that.
Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as the temperature in your rack is not too high).
Use M3 threaded inserts in the main part. Insert computer from the back and fix with the backplane. You can also replace the original screw in the computer by a longer one through the backplane - I can't remember the dimensions though. However, if your Lenovo has its rubber feet, it is not necessary as it cannot fall out the front anyways.
You can use the keystone slots to bring network/usb connections to the front, the slots are a tight fit but it should work (difficult/impossible to remove though). The holes in the side are for zip-ties to tidy up the cabling.